I got alot of help when i posted a thread when I was looking for which brand to go with, now my gauges come in on thurs and will be needing help installing. Wires confuse the hell out of me and I hate installing electronics. Anyone recommend a shop (or not recommend a shop) for install or anyone here really good and is available this weekend?? Willing to pay thanks

 

what kind of gauges are you putting in?

 

Here's a step by step on an STi for boost, oil temp, oil pressure. Follow these and you'll be good. Hardest part is the sensors. Wiring from the center clock is the easiest way.
http://www.iwsti.com/forums/how-inst...-complete.html

 

you could bring em when we have an install meet if ya want

 

it will be boost, a/f and oil pressure putting them in the clock spot. when do you have install meet?

 

Is the AF Wideband or Narrowband? There will be extra work if wideband since you will have to weld on a bung to your DP, the others should be no problem as long as you have either the galley plugs required, or a sandwitch adapter.

 

not necessarily. if he is using an after market DP he can just remove the rear O2 sensor and use that bung. then all he would have to do is flash out the CEL. the rear O2 is pretty worthless since the ecu uses the front O2 for measurements.

and if he bought a narrowband that will pretty worthless unless he wanted a light show

 

^ Yeah, but the o2 sensor placement in most aftermarket DP's isn't really where you want a wideband sensor, but yes it would work. And u just never know, some people like light shows!

 

the a/f is wide band, I went with all aem digi gauges.

 

yeah I think its like 15 inches minimum post turbo. mine is in the same location that my OEM cat would be if I had one.

 

not really sure... seems like the only day people are having off is fridays but i work fridays and it wont workout too well since i offered to do the install meet at my house

 

I might have off tomarrow and the rest of the weekend as well

 

i only have saturdays and sundays off

 

forgot to buy a sandwich oil filter adaptor for the oil pressure guage, anyone have one??

 

buy a gallery plug from from the suby dealer (parts department), it's a cheaper route and I don't mean cheaper as in quality.

here is the part#

Subaru part number:

11024AA210 - Main Gallery Plug