doing resonator removal on friday
Thread Starter
Registered User
iTrader: (16)
Joined: Jun 2004
Posts: 3,823
From: mid-atlantic/va
Car Info: 09 xt
doing resonator removal on friday
has anyone here done the resonator removal?? it seems easy, i'm gonna do it friday morning, please share experiences or comments......t.y.
VIP Member
iTrader: (7)
Joined: May 2003
Posts: 4,990
From: on da compz...readin' yo blogz
Car Info: "the loud one"
very easy removal...i suggest either getting the silencer delete elbow replacement thing....not sure what its called but here's a site...
http://cgi.ebay.com/ebaymotors/ws/eB...category=38634
anyway....have fun...and make sure to remember to tighten every nut/bolt good...you dont want any loose bolts rattling around....
http://cgi.ebay.com/ebaymotors/ws/eB...category=38634
anyway....have fun...and make sure to remember to tighten every nut/bolt good...you dont want any loose bolts rattling around....
Registered User
Joined: Jul 2003
Posts: 499
From: North NJ
Car Info: Black WRX, stock
My words of experience for you: 1. take the fender liner all the way out, don't try to force things with it still in place. 2. Like 808 says, if you are using a deleter elbow tighten the bolt down real well or it will work itself off.
Enjoy!
Enjoy!
VIP Member
iTrader: (23)
Joined: Feb 2004
Posts: 4,128
From: Driving the Green Beast
Car Info: Version 7.5 2002 STi
http://www.scoobymods.com/forums/sho...=&threadid=113
I personally just sealed up the hole where the airbox and the fender meet with weather stripping and covered the hole where the scoop was with the OEM RS part. Schuman has it for like $3 but it's special order
I personally just sealed up the hole where the airbox and the fender meet with weather stripping and covered the hole where the scoop was with the OEM RS part. Schuman has it for like $3 but it's special order
Thread Starter
Registered User
iTrader: (16)
Joined: Jun 2004
Posts: 3,823
From: mid-atlantic/va
Car Info: 09 xt
it was easy as cake, now i can hear the turbo spool up better, and the blowoff valve is louder at high rpm's. i need to go and find the adapter or something to plug up those two holes left. i might get that tubing from that vendor off ebay, or i'll tape the holes up. thanks to everyone for the advice!!! hey sykosis, is it shumann carriage, that ur talking about, and is that the only place that i can buy weather stripping tape, or do u think hhome depot has it??
Last edited by 808subaru; Jun 25, 2004 at 05:37 PM. Reason: add on
VIP Member
iTrader: (7)
Joined: May 2003
Posts: 4,990
From: on da compz...readin' yo blogz
Car Info: "the loud one"
Originally Posted by marko
in scoobymods.com, they talk about reseting ECM to prevent it from cel to come on, is this necessary? if so how do u reset it?
VIP Member
iTrader: (7)
Joined: May 2003
Posts: 4,990
From: on da compz...readin' yo blogz
Car Info: "the loud one"
Originally Posted by kawshon1
step on your brake pedal after you unplug the neg, for like 5 seconds, or until your interior light goes off. then reconnect the neg.
Thread Starter
Registered User
iTrader: (16)
Joined: Jun 2004
Posts: 3,823
From: mid-atlantic/va
Car Info: 09 xt
marko, depending on what u need to reset the ecu for, i would let the ecm learn by itself, without resetting and having it to learn all over again...
