please if anyone could help install them tomorrow (sunday 2/22/04) give me a call. i have boost, air/fuel, and oil pressure. lunch will be provided. i mean, as long as its like 1 or 2 peeps then thats fine. help a brutha out. 277-7037. aloha, myron

 

I won't be any help, but send me a PM if they're gonna be installed tomorrow. I'd like to stop by & check it out, as I'll be doing a couple of gauges in the near future. If that's cool with you, of course.

 

Who makes the gauges?

Jon

 

these are autometer gauges.


p.s. i really want to have these installed but i have no clue on how to wire them up. so if you're willing to help out, please give me a call tonight anytime or tomorrow morning. thanks

 

do gauges, buy am doing a UTEC tomorrow. Gauges ain't hard, so I might be able to help, if you can come my way (Hickam). I have a Fluke, and tools. Where are the gauges going to physically reside (pod, pillar)?

San

 

?'s
Do you have everything needed to install? The boost gauge comes with some sh!tty vacuum line, ... you should get a fitting from Kilgo's that goes on the back of the gauge, so that you can use 'regualr' 3/16" vacuum line, then it will be easier to tap a 'T' into the BOV vacuum line. Otherwise, you'll be trying to make something to 'T' into that line (which will leave you with some big monstrosity of a 'T').
Which sensor do you have for the oil pressure? Do you have the correct fitting to fit it to the block? It needs to be metric.

 

i wont be going your way but ill head over there anyways to meet up with you. it will go on my a-pillar.

nolimit: i only have the stuff thats in the box. so what will be needed? those things that you mentioned? wanna come with me prior to the install? thanks guys. myron

 

I would be Glad to help out, but I'm booked this weekend!

For the oil pressure gauge, you will need a metric fitting, or 'T', to connect it. It connects under the alternator (i think, or a/c), where there is already a sensor. So you'd just 'T' it in. Sorry I can't be more precise on that right now.

the fitting I mentioned for the boost gauge looks like this:
you can get one from Kilgo's on Sand Island Access Road.

 

but if you don't have all the fittings and accessories required, you should plan this out a bit better. Some gauges come with all you need, some with most, but some come with almost none. Nolimit is right, have you done your homework as to what is needed?

San

 

k, i knew that some stuff would be needed to install them gauges. but i was told from the seller that it comes with everything i need for installation. the fitting that nolomit is talking about, thats a npt fitting, right? see, i did do my homework. i can easily drop by kilgos or somewhere else to buy these things before i come. lmk

 

k its about 12 right now and i dont think oldmansan is gonna call me up. is there anyone else that can help me out? give me a call 277-7037. mahalo's myron

 

be stuck at home as my wife is running around to go back to the mainland for a funeral. I could help you out if you can get to my house.

San

 

where do u live

 

Him or me? I live on Hickam. 422-2595.

San

 

sorry u san

don't u need a pass to get through the gate