Anyone know where to get a "1/8 Connector" ? (Apparently 1/4" to 1/8" Adapter)
Anyone know where to get a "1/8 Connector" ? (Apparently 1/4" to 1/8" Adapter)

I tried home depot, but of course as usual I couldn't find anything remotely close to it. : /
Any help would be greatly appreciated.
Last edited by chubby_one; Jun 20, 2005 at 02:15 AM.
As a last resort (only because of shipping costs) www.mcmaster.com has all sorts of crap
Registered User
iTrader: (14)
Joined: Jan 2003
Posts: 1,224
From: Honolulu, HI
Car Info: 1991 Toyota MR-2 Turbo
Those are hard to find. What I do is use a piece of silicone vacuum hose instead. Slide the nylon tubing into the silicone hose and then use a tie wrap on the silicone hose to tighten it up. Works great.
Registered User
iTrader: (33)
Joined: Nov 2002
Posts: 10,455
From: Boostin' troubles away - 4EAT Memories 12.87@103.2
Car Info: 51E LHD V7 STI (2.0)
well what I ended up doing (it's more expensive this way) but you'll have exactly what you'll need...
go to home depot again
buy 1 brass insert threaded T fitting (it has internal threads at each end)
buy 2 brass or plastic insert threaded to 1/4" barb fittings
buy 1 brass or plastic insert threaded to 1/8" bar fitting
assemble the "T" and you'll have exactly what you want. it's a lot bigger than the plastic type but this will insure the connection. sorry I don't know the exact name of the fittings so I did the best I could
go to home depot again
buy 1 brass insert threaded T fitting (it has internal threads at each end)
buy 2 brass or plastic insert threaded to 1/4" barb fittings
buy 1 brass or plastic insert threaded to 1/8" bar fitting
assemble the "T" and you'll have exactly what you want. it's a lot bigger than the plastic type but this will insure the connection. sorry I don't know the exact name of the fittings so I did the best I could
Last edited by iNfEk; Jun 20, 2005 at 11:07 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Drew's rex
Bay Area
1
Jul 14, 2013 09:55 PM
jankenpon
Used Aftermarket Car Parts For Sale
5
Nov 25, 2008 06:21 PM
jankenpon
SoCal Classifieds
3
Nov 23, 2008 10:12 PM




