2002/2003 V-Limited Lip!
08-30-2008, 10:31 PM
#1
Registered User
Thread Starter
iTrader: (8)
Join Date: Dec 2005
Location: Between Kapolei and Sand Island mostly
Posts: 512
Car Info: Genesis Coupe - Karussell White 2.0T Track Model
2002/2003 WRX Wagon V-Limited Replica Lip!
hehehe well okay .. maybe not exactly.... but damn it looks good.
more pix here:
http://picasaweb.google.com/bmatsush...n06VLimitedLip
more pix here:
http://picasaweb.google.com/bmatsush...n06VLimitedLip
Last edited by tazer; 08-30-2008 at 10:38 PM.
08-30-2008, 10:41 PM
#3
Registered User
Thread Starter
iTrader: (8)
Join Date: Dec 2005
Location: Between Kapolei and Sand Island mostly
Posts: 512
Car Info: Genesis Coupe - Karussell White 2.0T Track Model
Thanx for the compliments!
Here's the Details
Bayson-R Polyurethane V-Limited Lip for an 06/07 Sedan (also fits 06/07 Wagons)
installed on a 02 WRX Wagon
The rest.. pix are self explanatory. No cutting, minimal drilling. Most "body clip" holes were lined up (just needed to be elongated a little bit)
Here's the Details
Bayson-R Polyurethane V-Limited Lip for an 06/07 Sedan (also fits 06/07 Wagons)
installed on a 02 WRX Wagon
The rest.. pix are self explanatory. No cutting, minimal drilling. Most "body clip" holes were lined up (just needed to be elongated a little bit)
Last edited by tazer; 08-31-2008 at 05:47 PM.
08-31-2008, 12:20 PM
#6
Registered User
Thread Starter
iTrader: (8)
Join Date: Dec 2005
Location: Between Kapolei and Sand Island mostly
Posts: 512
Car Info: Genesis Coupe - Karussell White 2.0T Track Model
Thanks for the compliments every1.
I hope that bug-eye (heck even the 04-05) wagons start getting more love now that there is an "idea" of what might fit..
the 06 lip(s) have a high chance of fitting (if polyurethane) as it 'looks' like the measurements from side to side on the 06 are about the same as on the bug-eye wagons...
the 08 lips that are just coming out look promising as well for the older wagons. I'll have to get one when they come out in polyurethane,.. if only just to try it.
A little bit enhanced pic..
I hope that bug-eye (heck even the 04-05) wagons start getting more love now that there is an "idea" of what might fit..
the 06 lip(s) have a high chance of fitting (if polyurethane) as it 'looks' like the measurements from side to side on the 06 are about the same as on the bug-eye wagons...
the 08 lips that are just coming out look promising as well for the older wagons. I'll have to get one when they come out in polyurethane,.. if only just to try it.
A little bit enhanced pic..
Last edited by tazer; 08-31-2008 at 12:22 PM.
08-31-2008, 05:37 PM
#14
Registered User
Thread Starter
iTrader: (8)
Join Date: Dec 2005
Location: Between Kapolei and Sand Island mostly
Posts: 512
Car Info: Genesis Coupe - Karussell White 2.0T Track Model
Really not much to write up.. the larger holes (body clip holes) just lined up...
(used the supplied body clips to start the mount up)
I started with the center one(s) (left and right of the license plate) and then did my best to line up the others. (you will likely want to 'oval' some of the existing holes on the bottom of the bumper for easier 'clipping'.)
(I'll try to get pics when I remove it and reinstall it (after painting))
the rest of the issues are lining up the wheel wells and the corners.
everything else after that is just drill and bolt.
it did take a little pull/tug/massaging to get it just right, (especially where you you have to drill holes for the bolts), but the supplied 'self-tapping' screws are good for a temporary "mock up". (I'd recommend buying some 1/2-3/4" length ones as additionals, for an easier 'line up'. The supplied ones are a little long for the bug-eye bumper)
Thanks to all for the compliments. Happy to see it fits the sedans as well. (though they have PLENTY of alternatives already lol)
More as I think to post it.
(used the supplied body clips to start the mount up)
I started with the center one(s) (left and right of the license plate) and then did my best to line up the others. (you will likely want to 'oval' some of the existing holes on the bottom of the bumper for easier 'clipping'.)
(I'll try to get pics when I remove it and reinstall it (after painting))
the rest of the issues are lining up the wheel wells and the corners.
everything else after that is just drill and bolt.
it did take a little pull/tug/massaging to get it just right, (especially where you you have to drill holes for the bolts), but the supplied 'self-tapping' screws are good for a temporary "mock up". (I'd recommend buying some 1/2-3/4" length ones as additionals, for an easier 'line up'. The supplied ones are a little long for the bug-eye bumper)
Thanks to all for the compliments. Happy to see it fits the sedans as well. (though they have PLENTY of alternatives already lol)
More as I think to post it.
Last edited by tazer; 08-31-2008 at 05:39 PM.
09-01-2008, 07:09 AM
#15
huy! unkle Boy... ishstop daht or elsh No more tha kwan! KKarBoon pieber shyit ish por yuh.
na, i wish they fit my lights. n dave, where are the pics of yours man? lets see that lip!
burt, any chance you could help check to see if mine would work??? somehow i doubt it and i really dont want to drill into the prodrive. ahh o wells. NiBER Mined
na, i wish they fit my lights. n dave, where are the pics of yours man? lets see that lip!
burt, any chance you could help check to see if mine would work??? somehow i doubt it and i really dont want to drill into the prodrive. ahh o wells. NiBER Mined
Last edited by rally_wrx; 09-01-2008 at 07:12 AM.