UD Pulley size questions

Reply Subscribe

Thread Tools

Search this Thread

Jan 15, 2003 | 08:57 AM

2point5AWD

Thread Starter

Registered User

Joined: Jan 2003

Posts: 137

From: San Francisco

Car Info: '08 FXT Dark Gray Metallic

UD Pulley size questions

I have an UD Pulley on my 2.5 RS. I was sent pulleys to put on from the person I bought it from (this was over a year ago). I went to replace the belts and Auto Zone didn't have the same sizes any more. So they gave me these instead:

340K4
335K5

I think I need to tighten them more because the belts sqeek horribly when the car is cold. They tighteners are almost maxed out, so I was wondering if I should change sizes. Any suggestions guys? Thanks-

~Eric

Jan 21, 2003 | 04:26 PM

N/A

Guest

Posts: n/a

If the tensioner is almost maxed out then definately get smaller ones. If you still have the old ones then take them in so they can measure them. When I removed the A/C compression in my GTI-R I actually had to measure the thing for myself. I used a millimeter measuring tape (the one made from fabric) so that I could wrap it around the pulleys and get a close measurement. It seemed to work cause I took the measurement and they gave me the correct belt on the first try.