transmissions
#1
Registered User
Thread Starter
Join Date: Oct 2006
Location: Buffalo NY (for now)
Posts: 67
Car Info: '98 2.5RS
transmissions
i have a '98 rs. its an auto right now. i wanna swap it to a 5sp. i know all the **** ill need but is there anything like length differences that i might have to wory about in it. or is it a basic put in bleed clutch and put a clutch pedal assembly in and go. also. any advice on want tranny i would want to get? thanks for any help.
#2
VIP Member
iTrader: (17)
Join Date: May 2005
Location: Sunnyvale, CA
Posts: 22,776
Car Info: '13 BRZ Limited / '02 WRX
its different wiring and ECU as well as other physical parts like different crossmembers, different starter, and other stuff. Although they are on the wrong coast from you, email LIC Motorsports and Noah can give you a list of parts needed
#3
Registered User
Thread Starter
Join Date: Oct 2006
Location: Buffalo NY (for now)
Posts: 67
Car Info: '98 2.5RS
ok. thanks for the help. it might be useful for you to know im at wyotech right now so im not to worried about not knowing how to do the work and the wiring. i know all that. im worried about like tranny lengths and stuff. everything else is just another couple 30 racks away.
#5
Registered User
Thread Starter
Join Date: Oct 2006
Location: Buffalo NY (for now)
Posts: 67
Car Info: '98 2.5RS
yeah. that was my worries. we have an import junkyard around here. so i might be able to find one there. i emailed noah. hopefully he'll get back to me so i can get a move on on the project. next after tranny is engine rebuild. then weld in a cage.
Thread
Thread Starter
Forum
Replies
Last Post