has anybody done this i was talking to ed at eq and he was saying to do it .. the only thing i am tripping about is how much i will have to cut off for it to fit the pipe it is replacing.. looking at getting the aps dr 525 fmic and installing the perrin blow thru tube.. any help will greatly be apprecialted..

 

Perrin is a vendor on here, and I am sure their solution would be to use a Perrin intercooler, but you may want to ask them anyways to see if there is any specific reason why not to do it.

 

it is much cheaper and easier to use the perrin fmic with the blow thru maf tube
IMO the stealth factor of the aps fmic doesn't outweigh the price and headaches it will cause you
good luck

 

only reason i am going with aps is that i have fog lights that i wanna keep and i want the black intercooler core..

 

bump.................

 

The new perrin SS series comes with black piping and allows 06-07 to keep fog lights, you can always coat the core black

 

ok yes i see that now but theres another thing i don't like about the perrin both inlet to the intercooler and exit of the inter cooler are at the top... what does heat do it rises

 

Doesn't really matter where it enters/exits the IC. The air goes through many tubes within the intercooler. Plus with all the turbulence and speed of the air within your intake system, there won't be any time to have the dense (cooler) air settle to the bottom of any tube.