re:CEL fixes...
Thread Starter
Registered User
iTrader: (1)
Joined: Apr 2005
Posts: 752
From: In my TD04 WRX
Car Info: 2002 WRB WRX
re:CEL fixes...
i just bought a dc up pipe... and a hks downpipe.. wut exactly do i need to make it so i wont have a check engine light.. i know about a CEL fix... and something about a 2.2k resistor mod... but if someone could.. whut is the exact peices i need and how much am i lookin at..
VIP Member
iTrader: (8)
Joined: Jun 2004
Posts: 2,470
From: Fremont/Las Vegas
Car Info: 2004 PSM WRX
CEL fix = $10-15, Radioshack Resistor = $ 2 . . . the cel fix is more reliable but either should work. all you have to do it solder them in or just get some butt crimpers.
Thread Starter
Registered User
iTrader: (1)
Joined: Apr 2005
Posts: 752
From: In my TD04 WRX
Car Info: 2002 WRB WRX
well im kinda confused right now.. i searched and i couldnt get an exact answer just whole bunch of different ones.. anyways.. can someone tell me the exact items i need to buy for the downpipe and up pipe CEL fixes.. how many.. whut exactly is it called...
Guest
Posts: n/a
Actually you only need one "cel fix" . The sensor on the up-pipe is actually just an EGT sensor.. and needs not be "tricked" no matter wether or not you change the up-pipe, down pipe or both. So like I said you only need one "cel fix". And this is for the o2 sensor on the downpipe, There are 3 wires attatched to this sensor. You need to cut the white wire. and solder (recommended) or crimp the resistor (cel fix) in line. If it's the cel fix from Gruppe-S, the blue wire from the resistor attaches to the o2 sensor side, and purple wire to ecu side. Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
BeE_JiZZeLs
NorCal Classifieds
5
Apr 27, 2009 08:45 PM
mrtrex
Vendor Group Buys/Specials
0
Jan 12, 2003 09:58 AM