PSI for a stock suby?
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Apr 2004
Location: cali LA BABY
Posts: 393
Car Info: basically stock wrx
PSI for a stock suby?
how many psi is a stock suby suppose to have? another question, my BOV is like really messed up, and at 4-5.5rpm it makes a WHEEEEEE noise, i got a greddy type-s, and on my boost gauge, it like shakes like wobbles back and forth but not a lot... can anyone please help?!
#4
VIP Member
iTrader: (2)
Join Date: Dec 2003
Location: St. Louis MO
Posts: 1,245
Car Info: 02 PSM WRX
Im pretty sure stock boost is around 14.5-15 psi. My car peaks around 1 hkpa and I think 1 hkpa =14.5 psi. I have a Blitz turbo gauge and I think they are the only people on this planet that use hkpa (who knows why?). I dont know much about bov's but I have read that they need to be cleaned or they could cause problems.
#5
Registered User
Thread Starter
iTrader: (2)
Join Date: Apr 2004
Location: cali LA BABY
Posts: 393
Car Info: basically stock wrx
yeah... no wonder im losing so much hp damn this is like horrible, a integ smoke the S**T out of me and right after an 80's hatch boned out... so you guys think its the BOV... im only like pushing 8-10 psi
#6
Technical Know-It-All
Join Date: Oct 2003
Location: Sterling, VA
Posts: 2,123
Car Info: '02 WRX + '15 WRX
I'm only getting .9 bar in mine now. I used to get 1.3, and the way my AccessECu is flashed, that's what I'm supposed to be getting >:-|
Stock is either 13.5 or 14.5. My mind is dead right now cause of homework.
Stock is either 13.5 or 14.5. My mind is dead right now cause of homework.
#13
Guest
Posts: n/a
it must be the bov, cause when i got my type s i stripped the threads on the tention screw, didnt know it, went out for a run, ran fine till fourth gear, then the car kept going back and fourth cutting out,, i re tapped the bov and tightened the screw and it works fine now.