Help Asap Y Pipe
04-03-2006, 04:15 PM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: San Jose
Posts: 294
Car Info: 2003 ASPEN WHITE WRX
Help Asap Y Pipe
i just installed my APS y pipe to my stock TMIC....i put everything back and tightened everything but when i tried to full throttle my car it wont boost...it feels like the rev limiter was push back to 5k...i feel no boost whatsoever....can someone please help me...my mods are catless downpipe, RFL bov, perrin pulley...please help
04-04-2006, 03:14 PM
#2
did you just do the Y pipe
or did you do all that at once
the vaccume hose is on the BOV right?
the bolts are kinda tight on the BOV and the hose clamps are all snug
the two in the back of the IC the two from TB to IC and the one off the turbo?
tripple check taht first
or did you do all that at once
the vaccume hose is on the BOV right?
the bolts are kinda tight on the BOV and the hose clamps are all snug
the two in the back of the IC the two from TB to IC and the one off the turbo?
tripple check taht first
Thread
Thread Starter
Forum
Replies
Last Post
vsick
NorCal Classifieds
0
05-16-2011 02:26 PM
CynicalCS84
NorCal Classifieds
9
01-25-2011 09:01 AM
fliped wrx
SoCal Classifieds
1
06-08-2007 10:52 PM
gdbimpreza
Used Aftermarket Car Parts For Sale
0
03-03-2005 12:12 PM