downpipe install?
Guest
Posts: n/a
if you ever plan on doing an up pipe, i would highly advise you to do it now b/c your going to have to take the dp off once again in order to do the up pipe.
I just got done doing my up pipe today, a little under 6 hours in my post it says 5 but i messed up it was almost 6, it sucked majorly and i will never install another up pipe, i got qouted at 195 to get it done and i will pay someone next time, but i did have fun and me and the guys had some good laughs watching me bust my knuckles several times with the breaker bar.
lol
but if your feeling adventerous install the up pipe and dp at the same time but to answer your question, its possible to do the dp with a jack and TWO jack stands, b/c i've done it already LOL but does kill the back, just make sure you got lots of wd 40 or similar, let them soak and go at it.
Hope this helps
Matt
I just got done doing my up pipe today, a little under 6 hours in my post it says 5 but i messed up it was almost 6, it sucked majorly and i will never install another up pipe, i got qouted at 195 to get it done and i will pay someone next time, but i did have fun and me and the guys had some good laughs watching me bust my knuckles several times with the breaker bar.
lol
but if your feeling adventerous install the up pipe and dp at the same time but to answer your question, its possible to do the dp with a jack and TWO jack stands, b/c i've done it already LOL but does kill the back, just make sure you got lots of wd 40 or similar, let them soak and go at it.
Hope this helps
Matt
VIP Member
iTrader: (14)
Joined: May 2003
Posts: 8,675
From: Wherever Sucks the Most
Car Info: 2003 WRX, 2008 Camry
Originally posted by mauigrownwrx
yeah u can do it with just 2 jack stands i did it in about 3hours with just 2 of us.
yeah u can do it with just 2 jack stands i did it in about 3hours with just 2 of us.
just make sure you have a lot of light
eric
Registered User
iTrader: (6)
Joined: Aug 2003
Posts: 692
From: San Jose, CA
Car Info: http://goo.gl/XpkO0b & '99 SF 'S'
I just did my DP (TurboXS TB). You need to remove the TMIC to remove the turbo heatsheild, then the rest is pretty easy after removing the heatsheild. Putting the IC back on wasn't so easy. Overall, it takes about 3 hours to do the complete job. After putting the TB exhaust in, the power is amazing and and sound is cool.
Only other thing, is I got that CEL after 2 days since I am fully catless.
Only other thing, is I got that CEL after 2 days since I am fully catless.
Thread
Thread Starter
Forum
Replies
Last Post
gruppe-s
NorCal Classifieds
8
Dec 27, 2006 01:11 PM
BoOm
Hawaii
42
Nov 12, 2005 08:45 PM
spdkills
Suspension, Handling, and Brakes
5
May 23, 2003 09:41 AM