CEL fix help (for catless uppipe/downpipe)
Thread Starter
Registered User
iTrader: (5)
Joined: Sep 2004
Posts: 611
From: East Bay
Car Info: 2016 WRX
CEL fix help
So this weekend I'm planning on installing an STI Uppipe and a Stromung divorced wastegate downpipe on my 02 WRX. I've read a couple of threads that mention CEL mods to prevent from the CEL to come up. Does anyone have pics of the resistor CEL mods?
Registered User
iTrader: (26)
Joined: Nov 2002
Posts: 1,959
From: Gilroy, CA
Car Info: 2017 WRB WRX Premium
2.2k ohm resistor mod for uppipe
http://www.clubwrx.net/forums/showth...highlight=2.2k
MIL eliminator fix
http://www.wrxhackers.com/modules.ph...&highlight=mil
You can buy a pack of 5 2.2k ohm resistors for $.99 and you can make your own MIL eliminator for under $3.00.
Kurlee Daddee
(THE ORIGINAL)
http://www.clubwrx.net/forums/showth...highlight=2.2k
MIL eliminator fix
http://www.wrxhackers.com/modules.ph...&highlight=mil
You can buy a pack of 5 2.2k ohm resistors for $.99 and you can make your own MIL eliminator for under $3.00.
Kurlee Daddee
(THE ORIGINAL)
Last edited by KurleeDaddeeWRX; Mar 2, 2005 at 06:27 AM.
Thread Starter
Registered User
iTrader: (5)
Joined: Sep 2004
Posts: 611
From: East Bay
Car Info: 2016 WRX
Thanks for the info guys! I'll try the 2.2k mod but the MIL fix looks a lot more complicated. I might just buy the fix from grouppe-s, since I have to pick up gaskets anyway.
Thread Starter
Registered User
iTrader: (5)
Joined: Sep 2004
Posts: 611
From: East Bay
Car Info: 2016 WRX
I installed the up and dp last weekend but only did the 2.2k mod. No CEL yet, I didnt do the MIL fix because I didnt find a 1.2u F cap. How long do I have til the CEL light comes on?
Registered User
iTrader: (26)
Joined: Nov 2002
Posts: 1,959
From: Gilroy, CA
Car Info: 2017 WRB WRX Premium
Originally Posted by t3ch9
I installed the up and dp last weekend but only did the 2.2k mod. No CEL yet, I didnt do the MIL fix because I didnt find a 1.2u F cap. How long do I have til the CEL light comes on?
Kurlee Daddee
(THE ORIGINAL)
Originally Posted by t3ch9
Where can i find a 1.2uF Tantalum Cap? checked 2 radio shacks but they dont carry 1.2uF...
www.digikey.com
if you can't find an electronics component there it probably doesn't exist, or you have no earthly business using it
Registered User
iTrader: (7)
Joined: Dec 2002
Posts: 10,029
From: Sacramento CA
Car Info: 02 Impreza WRX sedan
For those who haven't yet done the resistor CEL fix for the catless uppipe, I wrote a new tutorial and included bunch of pics shot while I installed the resistor. This question comes up fairly often and I needed to get rid of that damned CEL code P0546, anyway. 
It's been almost a month and 2000 miles, including one 200-mile trip and two drag strip passes, and the CEL has not returned.
--
0==WW==0
"…axles of evil…" - george w. bush

It's been almost a month and 2000 miles, including one 200-mile trip and two drag strip passes, and the CEL has not returned.

--
0==WW==0
"…axles of evil…" - george w. bush
Thread
Thread Starter
Forum
Replies
Last Post
ASpec818
NorCal Classifieds
6
Jun 8, 2006 10:21 PM
esracer
Engine/Power - EJ20T (pre-2006 WRX and JDM)
4
Mar 16, 2004 11:56 AM
kalasend
Engine/Power - EJ20T (pre-2006 WRX and JDM)
8
Sep 19, 2003 12:24 PM




