I have a 99 rs 2.5 and i just swap the engine to a wrx 2002.
I just have a little problem, since i change the engine i had to change the ECU and rewire the whole car. The problem came when i have to install the wire to the fuel pump controller. THERE SI NO FUEL PUMP CONTROLLER IN THE RS!!! and also when i have to put the cluster in. NONE OF THE WIRES ARE THE SAME!!!
If anyone has the diagram for the stock wiring of the RS i would appreciate a some pics. I was going to buy the mechanic manuals but they are way to expencive< Please help me out with this I would forever appriceat it. Thank you all for your help

 

THANK YOU VERY MUCH

 

First - why did you change the cluster? There really is no need to (well unless you just want the wrx one). to keep things easy ...leave it stock.

Second - you will need the fuel pump relay and controller. The RS ecu does this function. The wrx has a controller that does the function. just connect the two wires from the pump to the controller and then follow suite to the ecu.

chris

 

i replace all the wires in the car so the new wire doesn't fit the cluster. i need to figuere out the color of the wires so i could connect it.

 

I am not understanding your situation. If you replaced all wires wouldn't that include cluster wires and fuel pump wires?
or are you saying that you are replacing just the cluster wires adn you need to mate the "old" set-up and the "new" setup?

I can send you some diagrams later.

chris
i-speedusa.com

 

the cluster connections don't match. so i used the old connection so i could hook up to the new wires so i could connect

 

i'm almost done tith the car. and everything worked so far

 

Let us know when you start it up. Good Luck

 

christoph1371
I need to know if you could send me the diagrams for the cluster that you told me about. that is the only thing i need to really finish the car. That is the only thing i haven't been able to figure out. If you could help me out with this i would trullyappretiat it

Thankyou very much

Laterz