ecu pinouts for 2001 impreza coupe 2.2L
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2002
Posts: 1,162
From: dover, NH
Car Info: 2001 sub. imp.
ecu pinouts for 2001 impreza coupe 2.2L
anyone have the manuals? if so, can you scan in the pages that have the ecu pinouts on them? i need to install a few apexi computers, and labor is gonna be an arm and a leg, so i would much rather do it myself, just dont want to pay 290 for manuals im probably only going to use once either. thanks
pinouts
Check out this link, you may find some help here
http://www.ravensblade-impreza.com/...ing/wiring.html
good luck.............
http://www.ravensblade-impreza.com/...ing/wiring.html
good luck.............
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2002
Posts: 1,162
From: dover, NH
Car Info: 2001 sub. imp.
broke down and bought books
Signal (Voltage)
Wire/Sensor Connector # Terminal # Ignition ON Engine ON Wire Color Note
Throttle Position Sensor B136 17 Fully Closed: 0.2-1.0 Grey
Fully Opened: 4.2-4.7
Knock Sensor B136 4 2.5 2.5 Purple
RPM B134 30 0-13 or more Green Waveform
Oxygen Sensor B136 18 0 0-0.9 Blue
Airflow In(from sensor) B136 5 3.4-3.6 1.2-1.8 White
Airflow Out(to Ecu) B136 Yellow
edit: this chart did not come out good in post, but if anyone needs the pinouts, i have the book, feel free to IM me on AIM screen name: scoobygc8
Signal (Voltage)
Wire/Sensor Connector # Terminal # Ignition ON Engine ON Wire Color Note
Throttle Position Sensor B136 17 Fully Closed: 0.2-1.0 Grey
Fully Opened: 4.2-4.7
Knock Sensor B136 4 2.5 2.5 Purple
RPM B134 30 0-13 or more Green Waveform
Oxygen Sensor B136 18 0 0-0.9 Blue
Airflow In(from sensor) B136 5 3.4-3.6 1.2-1.8 White
Airflow Out(to Ecu) B136 Yellow
edit: this chart did not come out good in post, but if anyone needs the pinouts, i have the book, feel free to IM me on AIM screen name: scoobygc8
Last edited by mysubaruimp; May 12, 2003 at 05:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mason77
Cars For Sale
1
Jul 17, 2016 01:21 AM
dorrington
Interior, Exterior & Lighting
3
Jan 1, 2005 07:50 PM




