Hi everyone, I am driving 04 WRX manual. I have just installed Cobb AP stage 2. My Greddy Profec e-01 installed almost a year. After I installed AP, I put the stock boost controller back because most people did in Cobb forum. But I found out the turbo spool up a way slower than EBC and not easy to meet target boost. I am wondering back to EBC soon. My question is "Any problem if I use EBC over the stock on my Cobb stage 2 setting.

Any member running AP and EBC together? Please help me with good subjection or idea, please? Thanks!

 

Turn the WG arm clockwise till you hit target boost.

 

If I turn it to meet target boost, is it spool up faster. Can you show me how to turn WG arm with diagrams or pictures? Thanks!

 

take off the heatshield. You'll see a little clip at the end of the arm. Push in the arm and the clip will loosen then you can take it off I use long nose pliers (DO NOT LOSE THIS). Then just pop out the arm. Then make one full rotation. Place the arm back push it in so its easy to put the clip back in. Then pull the arm out so it fits snug on the clip. Test to see if you are hitting target boost and adjust if u need to. Don't forget to put the heatshield back on. Good luck dude.


***TAKEN FROM SCOOBYMODS.COM***


I'd recommend doing your pulls in 3rd in 4th to see if you are hitting your target.