STANCE is now available at MACH III !!!!
Thread Starter
Former Sponsor
iTrader: (10)
Joined: Aug 2004
Posts: 218
From: San Francisco, CA
Car Info: Suby & others
STANCE is now available at MACH III !!!!
Hey guys,
Mach III is now a dealer for STANCE Coilovers. Just in case some of you guys don't know, they are a true "In-House" JDM company. This is how they explain the difference is between Monotube and Twintube coilovers
"Monotube suspension offers many benefits over conventional twintube suspension. Oil and gas are completely separated, which results in precise damping characteristics. Monotube design allows heat to dissipate much quicker. Inverted monotube design can resist extremely high lateral forces compared to an upright twintube suspension."
We currently have a couple of sets on order so if anyone is interested, please let us know ASAP so we can reserve your set. For 2005+ STI owners, don't worry because they make that application as well! They also come with front AND rear camber plates!
*Custome spring rates can be ordered and revalved*
WWW.STANCESUS.COM
Mach III is now a dealer for STANCE Coilovers. Just in case some of you guys don't know, they are a true "In-House" JDM company. This is how they explain the difference is between Monotube and Twintube coilovers
"Monotube suspension offers many benefits over conventional twintube suspension. Oil and gas are completely separated, which results in precise damping characteristics. Monotube design allows heat to dissipate much quicker. Inverted monotube design can resist extremely high lateral forces compared to an upright twintube suspension."
We currently have a couple of sets on order so if anyone is interested, please let us know ASAP so we can reserve your set. For 2005+ STI owners, don't worry because they make that application as well! They also come with front AND rear camber plates!
*Custome spring rates can be ordered and revalved*
WWW.STANCESUS.COM
Last edited by MachIII; Aug 7, 2006 at 05:29 PM.
Thread Starter
Former Sponsor
iTrader: (10)
Joined: Aug 2004
Posts: 218
From: San Francisco, CA
Car Info: Suby & others
got couple of WRX/STI sets coming in!
The WRX, STI, WRX Wagon is all the same fittment!
They do offer them with custome spring rates if you feel 8/6 is not stiff enough for you, or too stiff.
*Revalving is not needed unless going more than 3 kg difference in the springs*
The WRX, STI, WRX Wagon is all the same fittment!
They do offer them with custome spring rates if you feel 8/6 is not stiff enough for you, or too stiff.
*Revalving is not needed unless going more than 3 kg difference in the springs*
Last edited by MachIII; Aug 11, 2006 at 04:21 PM.
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
someone needs to talk them into making a wagon strut.
Nobody makes wagon struts. A wagon strut with their tech behind it would be DOPE.
Nobody makes wagon struts. A wagon strut with their tech behind it would be DOPE.
Registered User
Joined: Nov 2002
Posts: 131
From: Daly City
Car Info: Black 02 Wagon
Wagon Strut
Hello
This is Dave from Mach III. I have a wagon with stance on it right now. They work fine and the fact that the rears have camber plates is great. I'm using the spring rates that are on the sets that they have for the kit and it doesnt sag in the rears. If you are worried about the rates you can get custom rates in the rears and the fronts if you go up or down 3kgs then you dont have to have it re valved. Call me here or come by and you can check it out on mine.
Dave
Mach III
415-594-0030.
This is Dave from Mach III. I have a wagon with stance on it right now. They work fine and the fact that the rears have camber plates is great. I'm using the spring rates that are on the sets that they have for the kit and it doesnt sag in the rears. If you are worried about the rates you can get custom rates in the rears and the fronts if you go up or down 3kgs then you dont have to have it re valved. Call me here or come by and you can check it out on mine.
Dave
Mach III
415-594-0030.
Originally Posted by deeseeone
Hello
This is Dave from Mach III. I have a wagon with stance on it right now. They work fine and the fact that the rears have camber plates is great. I'm using the spring rates that are on the sets that they have for the kit and it doesnt sag in the rears. If you are worried about the rates you can get custom rates in the rears and the fronts if you go up or down 3kgs then you dont have to have it re valved. Call me here or come by and you can check it out on mine.
Dave
Mach III
415-594-0030.
This is Dave from Mach III. I have a wagon with stance on it right now. They work fine and the fact that the rears have camber plates is great. I'm using the spring rates that are on the sets that they have for the kit and it doesnt sag in the rears. If you are worried about the rates you can get custom rates in the rears and the fronts if you go up or down 3kgs then you dont have to have it re valved. Call me here or come by and you can check it out on mine.
Dave
Mach III
415-594-0030.
Originally Posted by deeseeone
Andy
Next time when you come get your subframe and top mount remind me and I'll Drive you around.
Dave
Next time when you come get your subframe and top mount remind me and I'll Drive you around.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
dunnojack
Ongoing Projects
19
Dec 18, 2007 08:37 PM
