gruppe-s

iTrader: (22)

Forrester FXT EJ25 Engine with the cam sensor adapter
$2999 + shipping
Qty 5


-Guys this is essentially a NEW USDM EJ25 STI engine, minus the red intake manifold. The real difference between the FXT and the USDM STI is tuning, turbo size, and intercooler size.
This engine is essentially capable of the same power output and torque as the USDM STi motor but at a much cheaper price.
-Less than 1000KM!!
-2.5 Liter, AVCS, etc.
-Long Block includes all pumps, sensors, intake manifold, alternator, etc




JDM WRX motor
$1549 + shipping
Qty 5
-Less than 1000KM!!
-2.0 Liter, AVCS, JDM Motor
-Higher compression than USDM motor
-Long Block includes all pumps, sensors, intake manifold etc
-no injectors/turbo/intercooler
-This motor features more aggressive AVCS cams and higher compression. With a JDM ECU - YOU WILL MAKE MORE POWER!!
-Will run with a USDM ECU but won't have AVCS





Rare STi S202 Oil Cooler ! !
$1799 shipped ! IN STOCK READY TO SHIP !



- Longer engine life
- Reduced heat load on engine and radiator
- Increased oil system capacity
- Lower under-hood temperatures and more!


Gruppe-S Light Weight Bumper Beam - 02+ WRX
$99.00 + Shipping!!!



We just installed a new bumper beam which we are sourcing from a manufacturer that is making this beam for their intercooler kits. This bumper beam is a direct bolt in for the 02-05 WRX's and 04+ STi. Built from SS304 stainless steel and painted black, the use of this beam saves a whopping 14 LBS off the factory beam!!
Designed to be used with larger intercoolers and oil cooler kits (check fitment first - does not fit all intercoolers w/o cutting), this beam is great for those of you looking for significant weight savings, ease of installation, and chassis rigidity at a great price.
Weighs only 14 lbs as opposed to stock 28.6 lbs.

STi Engine Mounts (Pair) - 02+ WRX
$110 shipped !

Excellent for people who drive their car on the track and autocross. While on the track, the engine mounts are subjected to extreme pressure and wear under breaking, acceleration, and turning. These STi mounts are substantially stiffer and more durable than the stock ones meaning that the engine will remain where it is supposed to be during extreme g-loads. Engine mounts should generally be replaced with tranny mounts so that undue stress is not placed on the stock mounts that are not replaced.

STi Transmission Mount - WRX 02+
$79 shipped !

Similar to STi engine mounts but for your tranny.

Combo for Engine/Tranny mount $175 shipped !


Gruppe-S Light Weight Pulley - 02-05 WRX/STi
$89 shipped!


~The Gruppe-S Light weight pulley is designed to replace the excessively heavy factory pulley. CAD Designed and CNC precision cut, our pulley weighs in at 1.2 lbs a huge rotational mass savings over the factory pulley.
~The addition of a lightened pulley great improves engine response and allows for a faster rev. Greater mid-range power can also be achieved with proper tuning.
~Our lightened pulley is not under-driven to insure maximum connectivity of belts and components.
~Anodized red, the Gruppe-S pulley will out last, provide increased performance versus, and look flashier than the factory pulley. Plus it is easily installed.

Gruppe-S Heat Shield (Heat resistant paint) - 02-05 WRX
$49 shipped !
It covers your aftermarket downpipes pretty well and keeps heat away from your TMIC. Even when one of our employees got pulled over and CHP asked him to pop his hood, CHP could not see his downpipe.





Regards,

Preston

Gruppe-S Engineering
29150 Simms Ct.
Hayward CA 94544

Phone: (510) 783-5300

We Accept Paypal!
Paypal: sales@gruppe-s.com
When ordering w/ paypal, please include the following:
product name: XXXXX
sales rep: Preston
Price including shipping: $XXXX
Shipping address.