Tranny HELP!

Reply Subscribe

Thread Tools

Search this Thread

Aug 4, 2003 | 06:34 PM

Bubs02wrx

Guest

Posts: n/a

Tranny HELP!

OK, My tranny went out they wont warrnty it... OF COURSE!
But my question is how the hell do u get this tranny out i mean i have got every nut, bolt and **** off the tranny... and it still wont come out .. i have about a 2 inch gap all the way around the tranny case.. it seems to be stuck on the 2 studs on the bottom some times one side will almost come off the stud, but nothing i do seems to make any progress.. if anyone can please help me it would be greatly appericated
oh yeah i have a 2002 wrx sedan...

thanks bubba

Last edited by Bubs02wrx; Aug 4, 2003 at 06:39 PM.

Aug 6, 2003 | 10:14 PM

WyldKardzWRX

Registered User

iTrader: (2)

Joined: Dec 2002

Posts: 296

From: Bay Area

Car Info: 2002 Aspen White Wrx Wagon

did you try tilting the motor backwards. when i replaced the tranny, i had 2 people under the car, 2 people on the side trying to pry it off, and 1 person standing on the frame tilting the motor back. and not to mention a floor jack under the tranny.

pete

Aug 16, 2003 | 05:24 PM

morphgabbin

Guest

Posts: n/a

when I pulled my motor I had to reach in and unbolt the pressure plate from the flywheel. The throwout bearing sticks to the pressure plate.

Aug 16, 2003 | 11:12 PM

tecniks

Guest

Posts: n/a

hehehe!! I just got it done a couple hours ago. Me and my friend started to push on it (towards back-end of car) and back and forth using 2 jacks going up and down over and over. it eventually popped out. Just be careful. Make sure all harnesses are removed.