how do u take out front axles?
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2002
Posts: 138
From: Wisconsin
Car Info: 94 impreza sedan
how do u take out front axles?
I know theres a ping type of deal that u have to take out to get them out but how do u take out the pin it wont move in eather direction we tried pulling it and pushign it out with a screw driver and hammer doesn't work help mee
Guest
Posts: n/a
Have you already removed the axle from the hub in order to see if it loosens the pin? Try spraying some lubricant into the opening on both sides and then if you have to tap on the pin from one side then if needed turn the axle and do it again from the other side and see if it works it loose.
How did you try to pull the pin out? The pin should have been inside the axle so you wouldn't have been able to pull on it.
How did you try to pull the pin out? The pin should have been inside the axle so you wouldn't have been able to pull on it.
Thread Starter
Registered User
iTrader: (1)
Joined: Dec 2002
Posts: 138
From: Wisconsin
Car Info: 94 impreza sedan
well there is about 1/4 inch of the pin sticking out we tried pulling on that the right side axle doesn't have anything sticking out
does it matter which end we use punch from?
does it matter which end we use punch from?
VIP Member
iTrader: (9)
Joined: Nov 2002
Posts: 4,665
From: No So Co
Car Info: '00 BRP RS Sedan / '04 PSM FXT (RIP)
I used an old drill bit to punch out the roll pin. It worked great, except for all the crap falling into my eyes. definitely wear some eye protection! But yeah, try using an old drill bit. The good thing about that is that you can find one the exact size you need.
-Brian
-Brian
Thread
Thread Starter
Forum
Replies
Last Post
datsun1
Used Aftermarket Car Parts For Sale
0
Apr 24, 2011 02:53 PM
resident smurf
Bay Area
5
May 30, 2005 08:17 PM
aups
Troll Hall
5
Jul 12, 2004 03:59 PM