Wiring Harness
08-01-2008, 07:15 AM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: st.pete florida
Posts: 136
Car Info: 1997 subaru impreza
Wiring Harness
Ok so I am just thinking ahead about a swap. I was just wondering if there are any other motors like the 2.5 out of an rs that would drop in and hook up without too much wiring needing to be done? I am not looking for an easy way out I actually wanna do a much bigger swap but was just thinking about putting something else in and maybe put a little bit of a build in it. But when I do a different swap I will probably look for a motor with harness unless my harness will work. Any ideas?
Thanks,
Kenny
Thanks,
Kenny
08-01-2008, 09:45 AM
#2
Registered User
Join Date: Nov 2002
Location: Boise Idaho, USA
Posts: 162
Car Info: 08 FS/07 FXT/93 GC8 blue/black/black
nope
and if you asked me (slanted view) even the 2.5 on the 2.2ecu is not a good swap. the fuel and advance tables are different enough to notice
get a 205
send the harness off
enjoy cheap GDA parts/EM
be happy
and if you asked me (slanted view) even the 2.5 on the 2.2ecu is not a good swap. the fuel and advance tables are different enough to notice
get a 205
send the harness off
enjoy cheap GDA parts/EM
be happy
Last edited by Jaxx; 08-01-2008 at 09:47 AM.
Thread
Thread Starter
Forum
Replies
Last Post
SDTONORCALWRX
NorCal Classifieds
10
01-30-2013 03:38 PM