Does anyone know of any problems with this swap. The block is an EJ20G closed deck with a Toda Racing Stroker kit. I know the heads will bolt up fine. That will let me keep the original wiring harness from the 02 WRX. Intake/Exhaust manifolds will bolt up too. Just need to know if the stock WRX 5 speed transmission and clutch will bolt up. I've seen people on here with similiar swaps(EJ22, EJ25) Any help would be appreciated. Thanks ahead of time. Scott

 

Anyone?

 

dude. you asking US from japan?

of course it bolts up. put the sucker togeather and show us how its done!

 

I've never seen a US WRX. Thanks for that bit of help though.

 

if its an ej20, it should bolt right up to the tranny no prob.

 

the starter bolts might be the only problem
all you have to do is drill and tap a hole no biggie because the tranny on a g motor has a stud on the tranny but you have two bolts for the starter