Aspen_2.5RS

First of all, I am NOT parting the car out at this time. I am looking to sell it as a whole deal. If I can’t get what I want for it as a whole, then I will part it out. Please don’t ask me about individual parts at this time. I will make a separate thread in the car parts classifieds if it comes to that.

2002 Subaru WRX
Silver exterior/black interior
Mileage: 21,175
The car was wrecked about 3 ½ years ago and has been stored indoors pretty much since the accident. It would give someone an excellent start on a swap, especially if you want to build up the motor first or if you want to part it out and make some money, either way.

I’ve put together a list to give you an idea of what parts you can expect to be bad and what parts are still ok. Here is a list of what I know that is either

Damaged or Unusable

-driver side front control arm is broken/bent
-steering rack/tie rod end on driver front is bent
-driver side rear lateral link is bent
-passenger front & rear doors are scratched and lightly dented
-lower cam gear is broken on driver’s side (valves are probably bent)
-timing belt covers are all broken
-a/c tensioner is pushed back into the timing belt cover
-radiator/condenser/fans are all unusable
-headlights are busted
-foglights are busted
-front bumper/hood/grill/fenders are all messed up
-washer overflow container is busted
-windshield washer fluid reservoir is dented/unusable
-oil fill on valve cover is broken
-clutch slave cylinder/bracket is broken
-glovebox handle has broken off
-front sway is bent
-both driver and passenger front airbags have been deployed
-muffler is beat up some
-passenger front seatbelt doesn’t retract
-xmember is probably bent
-car will come with steelies


Here is a list of what I know is either Still Good or believed to still be ok (this is off the top of my head, there are a ton of other parts that could be sold off of this car)

Engine related

-short block
-maf
-fuel pump
-injectors
-intake manifold
-throttle body
-turbo
-valve covers
-coil packs
-factory boost solenoid
-02 sensors (front and rear)
-alternator
-a/c compressor
-exhaust manifolds/crossover pipe/uppipe
- engine wiring harness
-cylinder heads (may need new valves)
-intercooler
-factory intercooler hoses
-maf elbow piping
-factory intake tube to the turbo
-plastic alternator belt cover
-ecu (engine computer)
-factory downpipe
-factory cat section after downpipe
-factory midpipe



Suspension/exterior/miscellaneous components

-bulk wiring harness
-hood scoop
-intercooler splitter
-transmission
-3 hubs (bearings, possibly 4)
-1 front axle (possibly 2)
-2 rear axles
-front brakes (calipers etc.)
-rear brakes (calipers etc.)
-clutch fluid reservoir assembly
-rear diff
-driveshaft
-passenger rear lateral link
-brake booster/master cylinder
-tail lights
-gas tank
-rear subframe
-trailing arms
-driver side front and rear doors
-emergency brake cables/e-brake parts for conversion from drum
-both side mirrors
-abs sensors
-body wiring (everything except what was damaged in the front – headlights, fogs, etc.)
-miscellaneous bolts
-spare tire
-jack
-wingless trunk (has a couple small dings, pdr should be able to take care of it)



Interior
-radio/cd player and speakers
-cupholder
-cigarette lighter
-front seats
-rear seat (needs to be cleaned)
-floor mats(need to be cleaned)
-carpet
-stock airbox
-center console
-trim around shifter
-gauge cluster
-gauge cluster trim
-pedal assembly (clutch, brake, gas)
-door panels
-all door glass is good
-windshield
-rear window
-autodimming mirror
-shift boot
-shift ****
-all switches (cruise, fogs, hazard, window switches, etc.)
-lock and window motors
-steering wheel rim (center is no good)
-headliner
-sunvisors
-radio trim
-all the plastic trim
-rear deck cover
-spare tire cover (board)
-trunk lining on floor and the walls on the side

I know I've left a ton of good parts out, but that was a quick list off the top of my head. $4500 o.b.o. AGAIN, I am not parting it out at this time, the list was just to give you an idea of what's good and what's not. Pics to follow below.

Thanks,

Cam

Aspen_2.5RS

calipers/rotors/backing plates removed to fit 13's

Aspen_2.5RS

Aspen_2.5RS

Aspen_2.5RS

It's now on ebay:
http://cgi.ebay.com/ebaymotors/ws/eB...tem=4645636946

The reserve is much lower than $4500.

If it doesn't sell there, I will begin parting it out. Thanks,

Cam