where in san jose to buy good clay bar?

Thread Tools
 
Search this Thread
 
Old Mar 12, 2005 | 11:58 AM
  #1  
mattsn0w's Avatar
Thread Starter
the artist formerly known as mcdrama
iTrader: (23)
 
Joined: Apr 2004
Posts: 6,428
From: Santa Cruz Mountains, CA.
Car Info: WRBP 2015 WRX Premium/CVT
Talking where in san jose to buy good clay bar?

Where in San Jose do you people buy clay bar? I need to clean my car and my girlfriends car today, then wax.

Any suggestions on what to get and where?

tia.
Old Mar 12, 2005 | 02:41 PM
  #2  
British Banger's Avatar
Underpants Gnome
iTrader: (1)
 
Joined: Mar 2003
Posts: 591
From: Cambridge, England
Car Info: 1.4 Ford Fiesta
Some Kragen's sell Mother's clay bars, but not all of them.
Old Mar 12, 2005 | 03:22 PM
  #3  
1WRX2NV's Avatar
Registered User
iTrader: (15)
 
Joined: Nov 2002
Posts: 4,962
From: watching you get smaller...in my rear-view
Car Info: 02 STi
Mothers sucks I would go for "clay magic". I think you can get that at pepboys.

I know mothers sucks, because you cant use regular water on the clay bar...if you do, it desolves. You have to use the supplied spray with it.

Clay magic, can be used with water. Which is better since you can use the water hose when you go over the car with the clay.

hope this helps

-freddie
Old Mar 12, 2005 | 03:55 PM
  #4  
gooder77's Avatar
Registered User
iTrader: (4)
 
Joined: Feb 2003
Posts: 1,391
From: Sparks, MD
Car Info: 2002 psm wrx
Originally Posted by 1WRX2NV
Mothers sucks I would go for "clay magic". I think you can get that at pepboys.

I know mothers sucks, because you cant use regular water on the clay bar...if you do, it desolves. You have to use the supplied spray with it.

Clay magic, can be used with water. Which is better since you can use the water hose when you go over the car with the clay.

hope this helps

-freddie
Dissolves like falls apart in your hand or dissolves like becomes all stiff?

I had the mothers brand and used the spray on one section...then used water on the other..in the end I found the bar to be stiff and brittle. is that what you mean.

Mothers did it did its job but I think my bar is done.
Old Mar 12, 2005 | 06:30 PM
  #5  
ipozestu's Avatar
VIP Member
iTrader: (18)
 
Joined: Aug 2004
Posts: 7,570
From: Subabrew Crew
Car Info: Broken Subarus
If I was looking for a off the shelf clay bar I'd go with the mothers. It does work with water. It works better with the instant detailer. The instant detailer actually helps you out when it comes to applying and removing wax and sealant
Old Mar 12, 2005 | 10:43 PM
  #6  
mattsn0w's Avatar
Thread Starter
the artist formerly known as mcdrama
iTrader: (23)
 
Joined: Apr 2004
Posts: 6,428
From: Santa Cruz Mountains, CA.
Car Info: WRBP 2015 WRX Premium/CVT
well, I didn't shop around much, I had to return an ODB code reader to kragen and all they had was mothers california clay bar, so I got that.
Sadly this was before 1WRX2NV posted about crappy mothers bar. :x
Old Mar 12, 2005 | 11:05 PM
  #7  
ipozestu's Avatar
VIP Member
iTrader: (18)
 
Joined: Aug 2004
Posts: 7,570
From: Subabrew Crew
Car Info: Broken Subarus
You'll be fine with the Mother's bar. It's not crap. DYAF and cut the bar in half and save a piece for later.
Old Mar 12, 2005 | 11:26 PM
  #8  
1WRX2NV's Avatar
Registered User
iTrader: (15)
 
Joined: Nov 2002
Posts: 4,962
From: watching you get smaller...in my rear-view
Car Info: 02 STi
Originally Posted by gooder77
Dissolves like falls apart in your hand or dissolves like becomes all stiff?

I had the mothers brand and used the spray on one section...then used water on the other..in the end I found the bar to be stiff and brittle. is that what you mean.

Mothers did it did its job but I think my bar is done.
the one I got was breaking apart...

if I remember correctly the directions say not to use with water.

-freddie
Old Mar 12, 2005 | 11:29 PM
  #9  
1WRX2NV's Avatar
Registered User
iTrader: (15)
 
Joined: Nov 2002
Posts: 4,962
From: watching you get smaller...in my rear-view
Car Info: 02 STi
Originally Posted by mcdrama
well, I didn't shop around much, I had to return an ODB code reader to kragen and all they had was mothers california clay bar, so I got that.
Sadly this was before 1WRX2NV posted about crappy mothers bar. :x

no, it's ok...Mothers will work and get the job done...I just think that the Magic Clay is better. Thats what I use when I detail cars, and thats what is used at detail shops that use clay bars. I havnt seen them us "mothers".

Anyway, like I said you will still be ok with it...so please dont worry, because of my earlier post.

-freddie
Old Mar 13, 2005 | 08:37 AM
  #10  
mattsn0w's Avatar
Thread Starter
the artist formerly known as mcdrama
iTrader: (23)
 
Joined: Apr 2004
Posts: 6,428
From: Santa Cruz Mountains, CA.
Car Info: WRBP 2015 WRX Premium/CVT
Originally Posted by 1WRX2NV
no, it's ok...Mothers will work and get the job done...I just think that the Magic Clay is better. Thats what I use when I detail cars, and thats what is used at detail shops that use clay bars. I havnt seen them us "mothers".

Anyway, like I said you will still be ok with it...so please dont worry, because of my earlier post.

-freddie
But dood, I am like, a pro detailer and stuff, even though I have never touched this 'clay bar' stuff. I cant be using crap!

hehehe.

OK, that was really lame. ;x
Old Mar 13, 2005 | 08:44 AM
  #11  
British Banger's Avatar
Underpants Gnome
iTrader: (1)
 
Joined: Mar 2003
Posts: 591
From: Cambridge, England
Car Info: 1.4 Ford Fiesta
Originally Posted by 1WRX2NV
no, it's ok...Mothers will work and get the job done...I just think that the Magic Clay is better. Thats what I use when I detail cars, and thats what is used at detail shops that use clay bars. I havnt seen them us "mothers".

Anyway, like I said you will still be ok with it...so please dont worry, because of my earlier post.

-freddie
Where do you buy magic clay, and how much are they?
Old Mar 13, 2005 | 08:46 AM
  #12  
Lowend's Avatar
Registered User
iTrader: (5)
 
Joined: Jul 2004
Posts: 4,301
From: San Jose, CA
Car Info: http://kiva.org/invitedby/brett4254
I know I'm a day late, but try my old shop www.speedmerchant.com
They carry the Zymol clay bars - expensive but top of he line.
http://www.zymol.com/phihome.htm
Old Mar 13, 2005 | 06:12 PM
  #13  
1WRX2NV's Avatar
Registered User
iTrader: (15)
 
Joined: Nov 2002
Posts: 4,962
From: watching you get smaller...in my rear-view
Car Info: 02 STi
Originally Posted by mcdrama

OK, that was really lame. ;x

+1...I didnt get what you were saying....

lol

-freddie
Old Mar 13, 2005 | 06:13 PM
  #14  
1WRX2NV's Avatar
Registered User
iTrader: (15)
 
Joined: Nov 2002
Posts: 4,962
From: watching you get smaller...in my rear-view
Car Info: 02 STi
Originally Posted by British Banger
Where do you buy magic clay, and how much are they?

I got it from a detail supplier called Bule Coral. I cant remember how much it was.
I think they have it at pep boys.

-freddie

EDIT: edit for my great spelling skillzzzzzz lol

Last edited by 1WRX2NV; Mar 13, 2005 at 10:36 PM.
Old Mar 13, 2005 | 08:19 PM
  #15  
Aln's Avatar
Aln
Registered User
 
Joined: Jan 2004
Posts: 180
From: Moraga
Car Info: 2004 Impreza 2.5RS
i detail cars for a dealership, I'd recomend clay magic. We use that stuff all the time, works awesome.



All times are GMT -7. The time now is 08:08 PM.