Vishnu on Autoweek
Thread Starter
Registered User
iTrader: (5)
Joined: Dec 2002
Posts: 318
From: Los Gatos, CA
Car Info: 05 Audi S4... trying to mod the driver!!!
Vishnu on Autoweek
Hey guys and gals.. I saw this article on Autoweek (Evo and 335i)
http://www.autoweek.com/apps/pbcs.dl.../70315001/1004
Zoeb--I don't recall the state of your relationship with Vishnu/Shiv but if it is good, are you one of the beta testers?
lndbrusr
http://www.autoweek.com/apps/pbcs.dl.../70315001/1004
Zoeb--I don't recall the state of your relationship with Vishnu/Shiv but if it is good, are you one of the beta testers?
lndbrusr
VIP Member
iTrader: (3)
Joined: Aug 2003
Posts: 2,539
From: Farnborough, Hants
Car Info: the blue bucket
Originally Posted by STiYLIN
what did it make? on the mustang of course?
I will say that it's a awesome sleeper as it sounds so quiet and runs so smooth, another thing as well is it was very well tuned with the power being repeatable from run to run and not a hint of anything bad going on.
Mike
Thread Starter
Registered User
iTrader: (5)
Joined: Dec 2002
Posts: 318
From: Los Gatos, CA
Car Info: 05 Audi S4... trying to mod the driver!!!
I have always been a fan of bmws and I am glad to see them come out with the 335i.. My only complaint other than the fact that I don't have one... I think it needs a limited slip.
I wonder if Zoeb is thinking Quaife.
I just wish that bmw would bring the 120d or 130i here in its current wagon/hatchback form.
lndbrusr
I wonder if Zoeb is thinking Quaife.
I just wish that bmw would bring the 120d or 130i here in its current wagon/hatchback form.
lndbrusr
Registered User
iTrader: (8)
Joined: Jul 2006
Posts: 3,160
From: Slumboldt
Car Info: I is not STiYLIN n e moar
Originally Posted by gilmore25
+1 for Mustang numbers
Originally Posted by gilmore25
+1 for Mustang numbers
Originally Posted by brucelee
That was the most bias article I've ever read... Did Shiv suck them off after they wrote it!?
I <3 White Girls
iTrader: (38)
Joined: Nov 2002
Posts: 26,491
From: Danville, CA
Car Info: E92 M3, E70, F32, E21
I dont have the graph on me so I can't scan it but the #'s were 275whp and 335 ft lbs @ 3K RPMS
Mike was saying that it reads pretty low on the mustang because the rear wheels spin the front rollers and front wheels as well.
I'm gonna dyno it on a dyno dynamics eventually as well, that # will be a slightly more accurate # as far as what its actually putting down to the rear wheels
Mike was saying that it reads pretty low on the mustang because the rear wheels spin the front rollers and front wheels as well.
I'm gonna dyno it on a dyno dynamics eventually as well, that # will be a slightly more accurate # as far as what its actually putting down to the rear wheels
Registered User
iTrader: (8)
Joined: Jul 2006
Posts: 3,160
From: Slumboldt
Car Info: I is not STiYLIN n e moar
Originally Posted by Zoeb2s
I dont have the graph on me so I can't scan it but the #'s were 275whp and 335 ft lbs @ 3K RPMS
Mike was saying that it reads pretty low on the mustang because the rear wheels spin the front rollers and front wheels as well.
I'm gonna dyno it on a dyno dynamics eventually as well, that # will be a slightly more accurate # as far as what its actually putting down to the rear wheels
Mike was saying that it reads pretty low on the mustang because the rear wheels spin the front rollers and front wheels as well.
I'm gonna dyno it on a dyno dynamics eventually as well, that # will be a slightly more accurate # as far as what its actually putting down to the rear wheels
congrats.


