Today at Edge Motorworks
Thread Starter
Former Sponsor
Joined: Apr 2013
Posts: 93
Today at Edge Motorworks
I've decided to start a thread on daily jobs and projects that come through the shop here at Edge Motorworks. Feel free to comment and ask questions.
Today May 24, 2013:
Vijay's (flat489) finished product, looking real mean! The car is a 2011 STi, he supplied RCE Tarmac 3 coilovers with camber plates, extended wheel studs and 5mm spacer for the front wheels to clear the big factory Brembo brakes. The rollers are 18x10 Enkei RPF1's with 265/35/18 Hankook R-S3 tires. To clear those meats we also rolled the rear fenders for added clearance. We are very pleased with this setup and how it turned out!
Today May 24, 2013:
Vijay's (flat489) finished product, looking real mean! The car is a 2011 STi, he supplied RCE Tarmac 3 coilovers with camber plates, extended wheel studs and 5mm spacer for the front wheels to clear the big factory Brembo brakes. The rollers are 18x10 Enkei RPF1's with 265/35/18 Hankook R-S3 tires. To clear those meats we also rolled the rear fenders for added clearance. We are very pleased with this setup and how it turned out!
Registered User
iTrader: (2)
Joined: Oct 2011
Posts: 2,695
From: S.F.BayArea
Car Info: Whatever The Lot Provides ;)
I'm so confused now, if the thread is about the day at the shop shouldn't we know which one it was?
Heeheehee, gonna swing by Dublin Tuesday to chat about stuffs and junk. Kick me for this post then.
Heeheehee, gonna swing by Dublin Tuesday to chat about stuffs and junk. Kick me for this post then.
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
If in doubt, FLAT OUT
iTrader: (33)
Joined: Oct 2010
Posts: 7,046
From: Nor Cal SJ
Car Info: 2010 Hatch, 2011 Sedan
Thread Starter
Former Sponsor
Joined: Apr 2013
Posts: 93