a strange sound on my coilover please help!!
#1
Registered User
Thread Starter
iTrader: (8)
Join Date: Jan 2010
Location: bay area
Posts: 236
Car Info: 02 wrx
a strange sound on my coilover please help!!
i just installed my coilovers on sunday and i notice a knocking sound when i hit a small bump on the road . i don't know what makes it but its only from the rear left coilover only. i tried raising the coils, screwing the bolts tighter and adjusting the hardness and softness but the knocking is still there. if anybody knows this problem please help! i can't find a way to get rid of the sound. oh and its BC Racing BR-Type coilovers by the way.
#11
Registered User
Thread Starter
iTrader: (8)
Join Date: Jan 2010
Location: bay area
Posts: 236
Car Info: 02 wrx
i tightened these bolts. pics is just an example.
http://www.swankmonkey.com/vw/jetta/.../top_bolt2.jpg
http://filebox.vt.edu/users/pgillett...kle%20Bolt.JPG
http://www.swankmonkey.com/vw/jetta/.../top_bolt2.jpg
http://filebox.vt.edu/users/pgillett...kle%20Bolt.JPG
#13
Registered User
iTrader: (8)
Join Date: Aug 2008
Location: San Mateo, Cali
Posts: 1,161
Car Info: 06 GMC Diesel
If you have Camber plates In the rear then you will need to tighten down the top bolt which Is a 17mm I think with an Impact gun, I have the same exact series BC coils and I had that problem, I tightened them down with a regular ratchet and It still made the noise. So I called BC and asked them what they do and they told me to use an Impact gun on the top bolt. Solved It for me.
I'm talking about the upper tower bolts, This only applies to you If you have rear camber plates. I'm not sure what regular top hats look like with these coils.
I'm talking about the upper tower bolts, This only applies to you If you have rear camber plates. I'm not sure what regular top hats look like with these coils.
#15
Registered User
Thread Starter
iTrader: (8)
Join Date: Jan 2010
Location: bay area
Posts: 236
Car Info: 02 wrx
If you have Camber plates In the rear then you will need to tighten down the top bolt which Is a 17mm I think with an Impact gun, I have the same exact series BC coils and I had that problem, I tightened them down with a regular ratchet and It still made the noise. So I called BC and asked them what they do and they told me to use an Impact gun on the top bolt. Solved It for me.
I'm talking about the upper tower bolts, This only applies to you If you have rear camber plates. I'm not sure what regular top hats look like with these coils.
I'm talking about the upper tower bolts, This only applies to you If you have rear camber plates. I'm not sure what regular top hats look like with these coils.