Sound-proofing a room: Where to buy cheap material?

Thread Tools
 
Search this Thread
 
Old Jan 20, 2009 | 06:58 PM
  #1  
kYLEMtnCRUZr's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Oct 2006
Posts: 11,892
From: Hangin in Placerville youtube.com/rallydude1515
Car Info: 1999 RS Coupé- 1995 Mazda Miata -KTM 300
Sound-proofing a room: Where to buy cheap material?

Hey, I'm helping my friend sound-proof a room...and need some tip$

Right now, our plan is to buy drywall that is like an inch thick, I'm telling him to do 2 levels of drywall, and have stuffing in between it.

Then the outside I've been looking for cheap egg/wedged pattern foam but the stuff is really expensive once you add it up...

Besides Costco egg crates...has anyone had any luck with any type of material/construction design?

And a good place to buy the material

Thanks a lot!
Old Jan 20, 2009 | 07:06 PM
  #2  
lanz0r's Avatar
Registered User
iTrader: (14)
 
Joined: Apr 2008
Posts: 6,558
From: California
Car Info: Blown Transmissions
bunch of dead bodies
Old Jan 20, 2009 | 07:13 PM
  #3  
white04wrx's Avatar
Registered User
iTrader: (4)
 
Joined: Sep 2004
Posts: 796
From: hayward/long beach
Car Info: 04 aspen white wrx


it worked in hustle and flow...
Old Jan 20, 2009 | 07:36 PM
  #4  
psoper's Avatar
250,000-mile Club President
 
Joined: Nov 2002
Posts: 4,770
From: Bizerkeley
Car Info: MBP 02 WRX wagon
depends...

on what exactly you are trying to do, there is specially made sheetrock specifically for reducing sound "transmission"- that is reducing the amount of sound that comes in or goes out through the walls, that is one target.

The other item you mention, egg crates or foam, are intended to reduce or diffuse sound reflections within the space- that is a different goal.

These goals are not usually met by the same treatments, properly implemented STC sheetrock involves mounting in resilient channels and stuff, and foam isn't an ideal absorber or diffuser for lower frequency stuff, but there are places to get it that aren't the most expensive- might want to give this guy a call;
http://sfbay.craigslist.org/nby/msg/999352410.html


If you are really on a budget, hanging carpet remnants isn't a bad compromise that has some limited effect on both fronts, but its not terribly effective on either one.



Here are a couple of links that go into more detail than I can;

http://www.primacoustic.com/acou-StopSound.htm

http://www.soundproofing.org/infopages/channel.htm
Old Jan 20, 2009 | 08:15 PM
  #5  
jagstyle's Avatar
10.07.85 - 05.22.10
iTrader: (7)
 
Joined: Oct 2007
Posts: 265
From: NorCal
Car Info: 2007 STI
Sheetrock is a good idea but for proper sound proofing you need to make sure that you decouple the walls. Do not attach the second wall of sheetrock to the first by any rigid means.

Understanding How Decoupling Works
Old Jan 20, 2009 | 08:16 PM
  #6  
kYLEMtnCRUZr's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Oct 2006
Posts: 11,892
From: Hangin in Placerville youtube.com/rallydude1515
Car Info: 1999 RS Coupé- 1995 Mazda Miata -KTM 300
Thanks^ ^^

wow thanks a lot. Yeah its an exercise room...but i'm planning to put a drum set in lol, its our little secret. I dont know if its an advantage but since the room is underground, it has concrete walls about 6' high then dirt/wood the rest of the way. We now have the skeleton of studs against the concrete, so i guess we shouldve left an air gap, since the wood is against the concrete in most places.

It's a basement, so the top floor cant really be modified...but i figure i can do the floor layer example to the ceiling of the room.

this looks good


maybe i'll get some cotton roll to put in between it. And use the foam on the outside ...or inside the room on the wall.

Last edited by kYLEMtnCRUZr; Jan 20, 2009 at 08:21 PM.
Old Jan 20, 2009 | 08:42 PM
  #7  
Lboogie's Avatar
banned
iTrader: (5)
 
Joined: Jan 2008
Posts: 1,456
From: NorCal, SF East Bay
Car Info: 2007 WRX Limited | vf43'D
I'll ask Ben Afflek what he uses for his hooker killing room.

I mean....dammit!
Old Jan 20, 2009 | 08:44 PM
  #8  
RussB's Avatar
VIP Member
iTrader: (2)
 
Joined: Apr 2003
Posts: 9,351
From: pompous douchebag
Car Info: $200,000 sports car
http://cmi-insulation.com/products/P...000%20(36).pdf

http://www.misb.com.my/documents/qua...Mechanisms.pdf

try to get this stuff... "quash" by Dow Corning. it's extremely light, cuts easily, isn't a fire hazard, and is extremely mold and mildew resistant. you'd just put it between the drywall and exterior wall.
Old Jan 20, 2009 | 09:37 PM
  #9  
international B's Avatar
Chewwwwy
iTrader: (5)
 
Joined: Nov 2002
Posts: 3,399
From: Fremont
Car Info: Random, yet well planed selection of jdm cult cars
psoper has the best info... if you want another little secret, put a small air space between your framing and the cement.

MAss and Decoupling.
Old Jan 20, 2009 | 09:40 PM
  #10  
Irish_car_B0mb's Avatar
Registered User
iTrader: (3)
 
Joined: Mar 2008
Posts: 6,970
From: Upper North Bay
Car Info: '15 LE STI, '06 WRX White Wheeled Wagon, '06 B9
also at home depot they have these 4 x 10 sheets of styrofoam. we have used them in the past for "sound reducing"

it s cheap meathod about 5-10 bucks a sheet depending on hwo think you get

they have 1.5 inches to 3 inches

if you rent or are on a budget this would be yoru best bet.

if you own there are better more costly methods
Old Jan 20, 2009 | 09:56 PM
  #11  
kYLEMtnCRUZr's Avatar
Thread Starter
Registered User
iTrader: (6)
 
Joined: Oct 2006
Posts: 11,892
From: Hangin in Placerville youtube.com/rallydude1515
Car Info: 1999 RS Coupé- 1995 Mazda Miata -KTM 300
His Dad owns, but his wife takes all his money lol...so yeah we're on a budget haha

Originally Posted by international B
psoper has the best info... if you want another little secret, put a small air space between your framing and the cement.

MAss and Decoupling.
Cool i just got home and saw there is 1"-6" air gap between cement and stud skeleton.

He says the "soundboard" he is currently sold on to work is 1/2" thick and has as much sound deadening as 4" of drywall. I dont know if thats a good way to go or not.

But as of now we will put the sound board on the inside walls, add stuffing, and slip drywall in between the airspace between wall and cement wall.

Thanks guys
Old Jan 21, 2009 | 12:44 PM
  #12  
international B's Avatar
Chewwwwy
iTrader: (5)
 
Joined: Nov 2002
Posts: 3,399
From: Fremont
Car Info: Random, yet well planed selection of jdm cult cars
Originally Posted by kYLEMtnCRUZr
But as of now we will put the sound board on the inside walls, add stuffing, and slip drywall in between the airspace between wall and cement wall.

Thanks guys
just make sure that you leave some airspace. if you look at any purpose built sound prrof or isolated rooms, its always made up of a couple walls with airspace inbetween, and nothing is touching the other one.
Old Jan 21, 2009 | 01:12 PM
  #13  
VRT MBasile's Avatar
VIP Member
iTrader: (17)
 
Joined: May 2005
Posts: 22,776
From: Sunnyvale, CA
Car Info: '13 BRZ Limited / '02 WRX
I'm afraid to ask why you need soundproofing...
Old Jan 21, 2009 | 01:27 PM
  #14  
kspek's Avatar
VIP Member
iTrader: (53)
 
Joined: Mar 2003
Posts: 4,808
From: touge
Car Info: non subarus
if you read the posts he said he's putting drums in there.

Originally Posted by kYLEMtnCRUZr

wow thanks a lot. Yeah its an exercise room...but i'm planning to put a drum set in lol, its our little secret. I dont know if its an advantage but since the room is underground, it has concrete walls about 6' high then dirt/wood the rest of the way. We now have the skeleton of studs against the concrete, so i guess we shouldve left an air gap, since the wood is against the concrete in most places.
.
Old Jan 21, 2009 | 02:33 PM
  #15  
JOEBOBBUCKET's Avatar
08.11.84 - 02.14.10
iTrader: (9)
 
Joined: Aug 2006
Posts: 2,694
From: Ca
Car Info: a center diff that is going...
we all know it is so kyle can have a room to store his hookers and blow.

-kyle if you need help let me know...



All times are GMT -7. The time now is 12:50 PM.