She's done finally!!
Thread Starter
The weal amewican hewo!
iTrader: (9)
Joined: Sep 2003
Posts: 2,434
From: Hayward, BAIC
Car Info: 02 Aspen White sedan
She's done finally!!
just wanted to post this to publicly to say thank you to a bunch of bay areans who worked on my baby, after it started almost a year ago.
- 1st wanna thank GST Motorsports (Mert, Tommy, Greg and Mike) for doing the entire install. I wanna thank Mike especially for being so freakin patient...diagnosing and doing all the wiring, then strapping the car onto the dyno off and on like 7x...i know it was a pain in the ***, but thanks mate for everything
- 2nd wanna thank Aaron (international_b) for being there as the jdm all knowing jedi master...thanks bro!
- 3rd : Adam and Noah at LIC...thanks for taking the time to figure out the entire AVCS thing...IT WORKS YES!!!
- Lastly Kevin & Shiggy @ AutoHq. Because i knew Mike was busy with TA and prolly didnt wanna see my car again lol, had Shiggy tune and Kevin check out the car to see that everything was in place and functioning correctly...oops and thanks Bryan (Ballz) for makin sure everything went smooth
Total Bay Area Suby shop and community collaboration..We got the best Subaru support anywhere! No real dyno numbers yet, but the car is freakin awesome! Here she is with a mod list...THANX AGAIN EVERYONE!!!
- daniel
IMG_9804.jpg?t=1272162061
Mod list:
Engine/Transmission:
- EJ207 spec-c (#EJ207DW4ER)
- Ecutek road tune by Shiggy
- oem STI header
- Koyo radiator
- Flexalite low-pro dual 12” fans
- Tomei Arms M7760 turbo
- Tial 50mm BOV (blue)
- ARC fmic w/ ARC air intake
- Greddy oil cooler
- Power Enterprise 720cc fuel injectors
- Walbro 255 fuel pump
- Cusco radiator hoses
- ARC oil pan
- MRT catless downpipe
- Tanabe Hyper Medallion catback
- Pivot turbo timer
- Zerosports push button starter
- CUSCO radiator cooling plate
- Beatrush pulley cover
- CUSCO water spray controller
- STI 12L intercooler spray tank
- Beatrush Aluminum underpanel
Transmission:
- STI JDM 6MT Transmission
- STI Front Half Shafts
- STI Rear Half Shafts
- STI Driveshaft
- STI Engine Mounts
- STI Tranny Mounts
- STI Pitching Rod
- CUSCO Type RS Rear Diff 1.5-Way
- CUSCO Type RS Front Diff 1-Way
Brakes:
- 345x32 4-pot 4-pad Project Mu Front Brakes
- STi 2-pot Rear Brembo Brakes
- Goodridge Lines
- Project Mu Titan Kai Pads
- Cusco Brake Master Cylinder stopper
Suspension:
-CUSCO Zero 2R Coilovers w/ 12kg/mm and 10g/mm springs
- CUSCO Trailing Rods
- CUSCO Lateral Links
- CUSCO 22mm Rear Sway Bar
- CUSCO 21mm Front Sway Bar
- CUSCO V2 Front Lower Arm Bar
- CUSCO Type CB Rear Strut Bar
- CUSCO Type OS-T Rear V-Brace
- STI replica Front Strut Bar
Exterior:
- JDM non-hid headlights w/8k HID ballasts
- STI foglight covers
- STI Authentic V2 lip
- APR carbon fiber rear diffuser
- JDM front and rear aeroguards
- Rota 18x9.5 +30e Grids (Gold) w/ 245/35/18 Falken FK452
- JDM STI hoodscoop
- JDM STI front grill
Interior:
- V7 complete interior (front and rear seats, door panels)
- STI blue carpet
- STI floor mats
- Pioneer DEH-P7700MP MP3/CD/tuner radio
- Takata Racing Harnesses (EXP.2007)
- Gauge hood
- Defi V2 60mm Oil Temp (green)
- Defi V2 60mm Boost (green)
- Defi V2 60mm EGT (green) (Note: needs new EGT sensor)
- Defi basic VSD HUD
- JDM STI red hazard button
- STI shifter trim
- Zerosports shift boot
- LED interior cabin light
- 1st wanna thank GST Motorsports (Mert, Tommy, Greg and Mike) for doing the entire install. I wanna thank Mike especially for being so freakin patient...diagnosing and doing all the wiring, then strapping the car onto the dyno off and on like 7x...i know it was a pain in the ***, but thanks mate for everything
- 2nd wanna thank Aaron (international_b) for being there as the jdm all knowing jedi master...thanks bro!
- 3rd : Adam and Noah at LIC...thanks for taking the time to figure out the entire AVCS thing...IT WORKS YES!!!
- Lastly Kevin & Shiggy @ AutoHq. Because i knew Mike was busy with TA and prolly didnt wanna see my car again lol, had Shiggy tune and Kevin check out the car to see that everything was in place and functioning correctly...oops and thanks Bryan (Ballz) for makin sure everything went smooth
Total Bay Area Suby shop and community collaboration..We got the best Subaru support anywhere! No real dyno numbers yet, but the car is freakin awesome! Here she is with a mod list...THANX AGAIN EVERYONE!!!
- daniel
IMG_9804.jpg?t=1272162061
Mod list:
Engine/Transmission:
- EJ207 spec-c (#EJ207DW4ER)
- Ecutek road tune by Shiggy
- oem STI header
- Koyo radiator
- Flexalite low-pro dual 12” fans
- Tomei Arms M7760 turbo
- Tial 50mm BOV (blue)
- ARC fmic w/ ARC air intake
- Greddy oil cooler
- Power Enterprise 720cc fuel injectors
- Walbro 255 fuel pump
- Cusco radiator hoses
- ARC oil pan
- MRT catless downpipe
- Tanabe Hyper Medallion catback
- Pivot turbo timer
- Zerosports push button starter
- CUSCO radiator cooling plate
- Beatrush pulley cover
- CUSCO water spray controller
- STI 12L intercooler spray tank
- Beatrush Aluminum underpanel
Transmission:
- STI JDM 6MT Transmission
- STI Front Half Shafts
- STI Rear Half Shafts
- STI Driveshaft
- STI Engine Mounts
- STI Tranny Mounts
- STI Pitching Rod
- CUSCO Type RS Rear Diff 1.5-Way
- CUSCO Type RS Front Diff 1-Way
Brakes:
- 345x32 4-pot 4-pad Project Mu Front Brakes
- STi 2-pot Rear Brembo Brakes
- Goodridge Lines
- Project Mu Titan Kai Pads
- Cusco Brake Master Cylinder stopper
Suspension:
-CUSCO Zero 2R Coilovers w/ 12kg/mm and 10g/mm springs
- CUSCO Trailing Rods
- CUSCO Lateral Links
- CUSCO 22mm Rear Sway Bar
- CUSCO 21mm Front Sway Bar
- CUSCO V2 Front Lower Arm Bar
- CUSCO Type CB Rear Strut Bar
- CUSCO Type OS-T Rear V-Brace
- STI replica Front Strut Bar
Exterior:
- JDM non-hid headlights w/8k HID ballasts
- STI foglight covers
- STI Authentic V2 lip
- APR carbon fiber rear diffuser
- JDM front and rear aeroguards
- Rota 18x9.5 +30e Grids (Gold) w/ 245/35/18 Falken FK452
- JDM STI hoodscoop
- JDM STI front grill
Interior:
- V7 complete interior (front and rear seats, door panels)
- STI blue carpet
- STI floor mats
- Pioneer DEH-P7700MP MP3/CD/tuner radio
- Takata Racing Harnesses (EXP.2007)
- Gauge hood
- Defi V2 60mm Oil Temp (green)
- Defi V2 60mm Boost (green)
- Defi V2 60mm EGT (green) (Note: needs new EGT sensor)
- Defi basic VSD HUD
- JDM STI red hazard button
- STI shifter trim
- Zerosports shift boot
- LED interior cabin light
Last edited by DanyoCantDrift; Apr 25, 2010 at 12:16 PM.
Thread Starter
The weal amewican hewo!
iTrader: (9)
Joined: Sep 2003
Posts: 2,434
From: Hayward, BAIC
Car Info: 02 Aspen White sedan
Registered User
iTrader: (25)
Joined: Jan 2004
Posts: 2,325
From: san francisco
Car Info: 2008 Forester XT 5spd
At first I thought I was gonna read about another sweet "bugeye" that was gonna be let go of. I was relieved to read this thread as a "check out my project and big thanks to the BAIC shops + international B.
Sweet bugeye, I'm always looking for that inspiration to keep my bugeye (since it's been payed off) and not spend more money on a newer car. Yours helps do the trick.
Sweet bugeye, I'm always looking for that inspiration to keep my bugeye (since it's been payed off) and not spend more money on a newer car. Yours helps do the trick.
Last edited by adizon; Apr 24, 2010 at 11:56 PM.
