S&S Autoconcepts 11.48 pass on Sac Raceway 8/31/07
Thread Starter
Registered User
iTrader: (3)
Joined: Jul 2006
Posts: 96
From: Concord, CA
Car Info: subaru wrx
S&S Autoconcepts 11.48 pass on Sac Raceway 8/31/07
Went bact to Sacramento raceway yesterday. Completed 5 runs and did a best time of 11.48 at 120.9 mph. This car was tuned at 29 psi but peak boost only registered at 25.3 it was really warm last night at Sac. Adjustment on driving and tire pressure were done. We were launching at 7000 rpm and adjusted the shifting to 8600 rpm. Car is really running strong. We think that we can lower this down to low 11.1's
- 2002 Subaru wrx
- S&S Autoconcepts stage 1 EJ20 engine
(Arias piston, Eagle rods, acl bearings)
- 272/272 crower cams with S&S pnp/combustion chamber work
- Fp green turbo with 3" inlet
- walbro fuel pump, from STI pinks to 750cc RC perrin fuel rail, adjustable regulator
- turbo xs top mount
- short ram intake
- Borla headers, titek downpipe, modified greddy catback
- AEM ems road tuned by Andrew
Drivetrain
- tilton clutch
- ppg/RA gears
- aluminum driveshaft
- DSS rear axles
Suspension
- cusco coil overs
- bushings
Wheels
- Enkei RPF1 17x8
- kumho V710
- 2002 Subaru wrx
- S&S Autoconcepts stage 1 EJ20 engine
(Arias piston, Eagle rods, acl bearings)
- 272/272 crower cams with S&S pnp/combustion chamber work
- Fp green turbo with 3" inlet
- walbro fuel pump, from STI pinks to 750cc RC perrin fuel rail, adjustable regulator
- turbo xs top mount
- short ram intake
- Borla headers, titek downpipe, modified greddy catback
- AEM ems road tuned by Andrew
Drivetrain
- tilton clutch
- ppg/RA gears
- aluminum driveshaft
- DSS rear axles
Suspension
- cusco coil overs
- bushings
Wheels
- Enkei RPF1 17x8
- kumho V710
Last edited by ssautoconcepts2; Sep 1, 2007 at 11:54 AM.
Registered User
iTrader: (5)
Joined: Apr 2007
Posts: 1,662
From: Sebastopol, CA
Car Info: '04 PSM Sti
damn, that's fast, and with a top mount ic. that gives me alot of hope. nice work!
________
Body Science
________
Body Science
Last edited by crfsti; Apr 24, 2011 at 02:05 PM.
I don't think we are going to make it tommorrow. Slightly busy at the shop and we are thinking of refreshing the engine too since it has gotten a lot of abuse already. See if we can get lower times with a fresh engine.
Thread
Thread Starter
Forum
Replies
Last Post






