NRG Gas Hood Dampers
VIP Member
Joined: Nov 2002
Posts: 12,422
From: Teh Phantom Zone
Car Info: 2013 Toyota Prius Plug In 2011 Toyota Prius
I judge many car shows down here in so cal, and I have seen both brands.
What I can tell you is the rust is common for the NRG, not the Tein.
Token Toyota Mod
iTrader: (50)
Joined: Jun 2004
Posts: 52,306
From: Palo Alto, CA
Car Info: Something german
I still don't get the honda comments. nothing wrong with owning a honda. good cars imo. if you're saying that honda = rice then it's safe to say subaru = rice. I've seen a few riced out subies. hell I even saw one with neons at the uckk meets a while back.
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
I've been able to get Tein dampers for $130 for a LONG time.
Shoot I saw them at that price long before I ever heard of NRG.
There are a lot of companies making dampers now...like redline. Lower cost,etc.
They don't lower to eliminate the little guys they lower because the little guys are there and less people are willing to pay there over inflated prices. They can afford to lower prices because their prices are over inflated. Get what you can while you can. The best of the best don't lower prices....like prova. Because it's a certain market that buys they're product...they'd rather sell one at a huge price and have that reputation than 5 at a lower price and loose that reputation. It would be like BMW lowering they're prices so they could compete with honda...why....different market.
But just like anything else...just because it cost less doesn't mean it has the right to be ****ty quality. It's not like the NRG product cost $50 on ebay.
Tein changed their focus. They started making more products and lowering prices...they changed their market attention. Anyone that was running tein before it was so widely available knows that.
Shoot I saw them at that price long before I ever heard of NRG.
There are a lot of companies making dampers now...like redline. Lower cost,etc.
They don't lower to eliminate the little guys they lower because the little guys are there and less people are willing to pay there over inflated prices. They can afford to lower prices because their prices are over inflated. Get what you can while you can. The best of the best don't lower prices....like prova. Because it's a certain market that buys they're product...they'd rather sell one at a huge price and have that reputation than 5 at a lower price and loose that reputation. It would be like BMW lowering they're prices so they could compete with honda...why....different market.
But just like anything else...just because it cost less doesn't mean it has the right to be ****ty quality. It's not like the NRG product cost $50 on ebay.
Tein changed their focus. They started making more products and lowering prices...they changed their market attention. Anyone that was running tein before it was so widely available knows that.
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
As for rice...I used to drive a honda, I have no issues with them. I tried to talk my fiance' into an si instead of her ****ty golf.
If the rust is common on a $150 product then something needs to be addressed at NRG. It's obvious their materials are not a high enough quality to be competing with someone like tein. So more threads like this NEED to be posted so people are made aware of the issue as are the folks at NRG.
Damn....so sick of this bull****. This forum is getting to be a joke. Everything has to be drama. Someone just has to stick in a comment for the sole purpuse of starting drama.
Warm Fuzzy Admin
iTrader: (45)
Joined: Mar 2001
Posts: 13,799
From: Sacramento, CA
Car Info: 97 LOB, 05 FXT, 03 Tundra
See what NRG says, but you live in Humboldt. You're on the water, you have salty fog, it's like the worst environment to cause surface rust.
It looks like the spring clip and the replacement fender bolt are what's rusting for the most part. It looks like surface corrosion on the fender and will probably buff off. The Teins come with a surface lube that prevents corrosion as well as wear, did the NRG's come with anything?
I've had Tein's on my car for over 3 years; after being parked outside for a few years, I did get some really light oxidation at the base of the fender bolt that went away with a bit of CLR. Anything parked outside and exposed to elements is going to suffer the same fate, and sea air will make it that much worse. Why not remove the damper, pull the bolt, scrub it down, and reinstall? Seems like normal maintenance for unpainted parts.
It looks like the spring clip and the replacement fender bolt are what's rusting for the most part. It looks like surface corrosion on the fender and will probably buff off. The Teins come with a surface lube that prevents corrosion as well as wear, did the NRG's come with anything?
I've had Tein's on my car for over 3 years; after being parked outside for a few years, I did get some really light oxidation at the base of the fender bolt that went away with a bit of CLR. Anything parked outside and exposed to elements is going to suffer the same fate, and sea air will make it that much worse. Why not remove the damper, pull the bolt, scrub it down, and reinstall? Seems like normal maintenance for unpainted parts.
If the rust is common on a $150 product then something needs to be addressed at NRG. It's obvious their materials are not a high enough quality to be competing with someone like tein. So more threads like this NEED to be posted so people are made aware of the issue as are the folks at NRG.
.
.
the wrx is becomming the new civic and evos are becomming integs.... =/
VIP Member
iTrader: (2)
Joined: May 2004
Posts: 10,752
From: WATCH OUT FOR THE SCIC SNITCH!!!
Car Info: .
TO THE op, yours just started rusting? i'm not sure who you bought it from but it looks like you bought the old batch. the problem has been fixed with ss parts.
http://www.iwsti.com/forums/showthre...D+DAMPERS+RUST
http://www.iwsti.com/forums/showthre...D+DAMPERS+RUST
Thread Starter
Registered User
iTrader: (8)
Joined: Jul 2006
Posts: 3,160
From: Slumboldt
Car Info: I is not STiYLIN n e moar
Yeah nothing else rusts here but these dampers...... Eureka doesn't have a rust issue. Good try. Our climate is too mild. And I am inland a bit.
VIP Member
iTrader: (17)
Joined: May 2005
Posts: 22,776
From: Sunnyvale, CA
Car Info: '13 BRZ Limited / '02 WRX
its simple business, cut costs to increase profits, then price your product more than the cometition so people fall for the "more expensive is more better" theory
Thread Starter
Registered User
iTrader: (8)
Joined: Jul 2006
Posts: 3,160
From: Slumboldt
Car Info: I is not STiYLIN n e moar
I just can't believe SoCal (LifePlaza and Sigma) have to come here just to talk shiot. This is about my RUSTY hood dampers on my STi that shouldn't have rusted, period. Why don't you guys go fawk yourselfs (it's obviousl you like chicks w/richards from all the pics youpost). I hope to one day meet both of you at a meet or a track day.
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
TO THE op, yours just started rusting? i'm not sure who you bought it from but it looks like you bought the old batch. the problem has been fixed with ss parts.
http://www.iwsti.com/forums/showthre...D+DAMPERS+RUST
http://www.iwsti.com/forums/showthre...D+DAMPERS+RUST
VIP Member
Joined: Nov 2002
Posts: 12,422
From: Teh Phantom Zone
Car Info: 2013 Toyota Prius Plug In 2011 Toyota Prius
I just can't believe SoCal (LifePlaza and Sigma) have to come here just to talk shiot. This is about my RUSTY hood dampers on my STi that shouldn't have rusted, period. Why don't you guys go fawk yourselfs (it's obviousl you like chicks w/richards from all the pics youpost). I hope to one day meet both of you at a meet or a track day.
I don't see how this post is related to you issue with the NRG hood dampers. We offered opinions and advice. Why else did you post a thread about it?
And if you really want to meet either one of us I'll be up in SF in August and after I'll be up in Monterey for a SCCA event Oct 15-22.
I just can't believe SoCal (LifePlaza and Sigma) have to come here just to talk shiot. This is about my RUSTY hood dampers on my STi that shouldn't have rusted, period. Why don't you guys go fawk yourselfs (it's obviousl you like chicks w/richards from all the pics youpost). I hope to one day meet both of you at a meet or a track day.
blitz is from so cal
and i have said before i agree they shouldn't have rusted
edit: we are having a track day at the end of the month
memorial day weekend come on down
Last edited by sigma pi; May 16, 2007 at 10:11 AM.
Thread Starter
Registered User
iTrader: (8)
Joined: Jul 2006
Posts: 3,160
From: Slumboldt
Car Info: I is not STiYLIN n e moar
No.
Seriously you have talked mad shlt to me many times. I am tired of being harrased by a mod. If I could set you to ignore I would. Stop replying to my threads. I am seriously going to complain to the site owner. A LOT of us NorCal guys feel the same way Sigma, so it's not just me..


