HELP ME!? PLEASE? lol..... On a serious note, my coilovers have these weird washers attached to the bottom bracket that supposedly adjusts camber. It has notches on it and I need a huge wrench and a socket to break it loose and adjust the camber. Just need help for about 30-45 minutes depending on how long it takes to break the nutz loose. If you can help, I would love you forever! Money is tight right now but I can repay u with....... food? cigarettes? friendship? a prom date?

Someone probably already knew this thread was coming.... so..... HERE IT IS! My cry for help. I need a 19mm socket and wrench for the top bolt and something bigger between 20-21mm for the bottom.

IMG_02801.jpg?t=1367908565

 

Where are you located? I have the stuff to help you break the nuts loose, but not sure how you want to deal with the camber without getting an alignment.

 

almost looks like whats used to adjust the rear toe? wierd.

 

i'll stand there and give moral support if needed

 

i believe he lives in the Sf area, but i might be wrong

 

SSF area

 

I have a breaker bar if you need help lol

 

any help is appreciated. i am just bothered greatly by the way my driver side rear tire looks. cambered too much. apetron im from ssf so if ur around or if u want me to meet u somewhere... i get off around 6pm today n tomorrow.

 

I am out in the Oakland Hills. You are welcome to come over tomorrow (can't do it tonight) after work and we can fix it. PM and we can get it sorted.

 

PB Blaster, breaker bar, One hour, beer is all u need