It's the worst thing ever and I wish I was dead now.


Tried putting V5 seats into an 06 WRX = worst mistake EVER.

 

Details maybe????

 

Side airbag sensor on the pass side = no airbag for passenger, wires are a PITA to disconnect, holes don't match up without dremel (so close, but so far.).

Want to shoot the car.

 

Why the car and not the person who tried doing all this nonsense Jk!!!!!! Well are you planning on going back to stock then or fixxing the issues you have in front of you????

-Gio

 

Its fixed. After a bunch of headache. (airbag issue still not fixed)


The seats are incredible in the WRX. They were in my RS... But damn, they change the feel of the entire car. Best seats ever.

 

And now there is no airbags in the seats and the srs light is probably on. should have just sold teh seats to me and bought new ones

 

+1 for V5 seats! I have some JDM WRX ones in my car which are pretty much the same as the jdm ver5/6 sti seats but they dont say sti on them and damn they hug nicely. alot better than usdm wrx seats

 

pics!

 

The airbag light is easy enough to fool

Just wire 3 10ohm resistors in parallel or find a 3.3ohm resistor, then stick it in the female socket

Did the same with my 05 driver seat when I put in my V8 seats. But yeah, you shoulda found some V8/V9 seats to bolt right in =P

 

bwhahahhaha..... i know that feeling

 

then post the video :banana:

 

its the same for every WRX

a resistor fixes that problem.

 

Will look into the resistor thing, thanks gals.,

 

I rigged the wiring for the "ding ding ding ding" for the seatbeat to NEVER go off again.

I was fooling around with the passenger seat sensor but I didn't want to take apart the old seat completely to get that gell pad out... so I just mangled it up. I was very high on vicodin (just had surgery). But, yeah... I need a resistor to get it to think someone is sitting there.
I need a resistor to disable the SRS on the driver's side.

Still too hazy to think clearly.

 

do you not wear seatbelts?