So i just bought new remote for my 05 Wrx.
and (Livermore Subaru) said I can only set it up if i still have my owner's manual but i don't have it anymore.
and they ask me that they can do it for me but I have to make an appointment for it.

is there any easy way to set up my keyless Entry?

 

yes you can do it yourself, I did mine its easy. Let me see if I can find the procedure.

 

Why would you only be able to do it with the owner's manual?

 

https://www.i-club.com/forums/bay-ar...05-wrx-169138/

 

I think this is it:

1. Get in vehicle and cycle key to the "ON" position 10 times withing 15 seconds, meaning pretty quickly. You will hear a beep or the horn will sound. (NOTE: Sometimes you have to turn it 11 times)

2. Open and close the drivers side door.

3. Press one of the buttons on the remote

4. Open and close the drivers side door.

5. **If you have other remotes, repeat steps 3 and 4 for all other remotes

6. Remove key from ignition, you should hear a beep/honk that the reprogramming has ended

7. Test remote(s)

 

Thanks Man!.

 

If it does not work, try cycling the key 11-12 times. I seem to remember getting frustrated doing it 10 times and not having it work, just turned the key a couple more times.

 

Okay I will do it more than x10
Thanks a lot Boss.

 

Its almost as if they try and make you look as stupid as possible while doing this. Don't forget to stall the car 4 times before youclose the drivers door.

 

Yeah . =/
I spot for a while it's too hot outside.

 

and remember, you need to do all this while sitting in the passenger seat.

 

Of the vehicle adjacent to yours?

 

Reminds me of turning off that annoying seat belt chime.