Honda Parts?
Honda Parts?
My friend drives a del sol and wants to improve the handling.
In my experience, Honda buyers will sell everything and buy everything -- this includes cut springs, brakes that look good but don't work, and "coilovers" that are really just bumpstops (but have a nice drop
).
Anyone know of a good, cheap, reputable Honda parts dealer?
Thanks in advance.
In my experience, Honda buyers will sell everything and buy everything -- this includes cut springs, brakes that look good but don't work, and "coilovers" that are really just bumpstops (but have a nice drop
).Anyone know of a good, cheap, reputable Honda parts dealer?
Thanks in advance.
Registered User
iTrader: (7)
Joined: Mar 2002
Posts: 9,016
From: Oakland, CA
Car Info: 2009 wrx & 2000 4runner
you might wanna try a place like www.honda-tech.com
i've posted there for a while...
i've posted there for a while...
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
honda-tech and superhonda both have pretty good access to honda vendors.
You might try modacar.
Shoot depending on what you want you could get some of what you want from some of our I-club vendors.
What are you looking for? I used to be a honda head and still post on honda boards from time to time to straighten out the ricers.
You might try modacar.
Shoot depending on what you want you could get some of what you want from some of our I-club vendors.
What are you looking for? I used to be a honda head and still post on honda boards from time to time to straighten out the ricers.
Originally Posted by OneManArmy
still post on honda boards from time to time to straighten out the ricers.
His brakes are the size of a personal pizza. They work for about 5 seconds, then they fade. I want him to have something larger, but nothing like brembos. Something of similar performance to stock WRX brakes.
I imagine a set of bushings (like energy bushings) would do wonders for his high milage car.
Also, something like AGXs and strut tower bars might be nice (I presume that strut tower bars actually work on a del sol -- considering it flexes pretty wildly without a roof).
Thanks for the tips guys
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
You'd be amazed at what better rotors/lines/pads/fluid do for hondas.
But yes...GSR is a good upgrade. ....do front and rear though.
as for strut bar...for the front I'd go neuspeed or benin. They're solid. Multi point and not rediculously priced...i.e. mugen. but honestly...it's not gonna make that big a difference on the delsol>
if I were your buddy I'd get a good spring strut combo...like neuspeed/koni. upgrade the sway bars. upgrade the breaks. Then worry about strut bars.
a good guy to talk to about suspension in regards to del sol's is Phantom_Sol on superhonda. PM him..tell him I sent you...I have the same name there.
But yes...GSR is a good upgrade. ....do front and rear though.
as for strut bar...for the front I'd go neuspeed or benin. They're solid. Multi point and not rediculously priced...i.e. mugen. but honestly...it's not gonna make that big a difference on the delsol>
if I were your buddy I'd get a good spring strut combo...like neuspeed/koni. upgrade the sway bars. upgrade the breaks. Then worry about strut bars.
a good guy to talk to about suspension in regards to del sol's is Phantom_Sol on superhonda. PM him..tell him I sent you...I have the same name there.
I post a lot on H-A.N. The sticky has a lot of info (helms, diys, etc)
http://honda-acura.net/
Here is what I have in my civic if your friend needs any tips, etc.
1- Cusco/ BP '92 Si Circuit Ready
1.6l sohc w/ heli LSD, NsII Sparcos 15X6.5 et42, Potenza S-03 205/50R15, Cusco Parts: Zero 2 Coilovers, STBS, MCS, Rad cap, 6pt Rollcage, Catch Oil tank. ITR 24/22mm swaybars, Fuel pump, Master Cyl & Brake Booster, Rear LCAs. ZSpeed LABs, ES bushings, ACT Flywheel, Upgraded Map sensor, JG Throttle body, Magnecore spark cables, Denso Plugs, MSD Ext. Coil, 935 CAI, Spoon VTEC controller, Fluidyne Rad, Sparco pedals & shift **** & Sprint Seat, Sabelt 4pt belt, 935 Short Shift, Feels brake lines, Feels F slotted rotors, Fast Brakes rear brake kit, AEM Pads & Porterfield R Pads(for track), JDM SiR Steering wheel
http://honda-acura.net/
Here is what I have in my civic if your friend needs any tips, etc.
1- Cusco/ BP '92 Si Circuit Ready
1.6l sohc w/ heli LSD, NsII Sparcos 15X6.5 et42, Potenza S-03 205/50R15, Cusco Parts: Zero 2 Coilovers, STBS, MCS, Rad cap, 6pt Rollcage, Catch Oil tank. ITR 24/22mm swaybars, Fuel pump, Master Cyl & Brake Booster, Rear LCAs. ZSpeed LABs, ES bushings, ACT Flywheel, Upgraded Map sensor, JG Throttle body, Magnecore spark cables, Denso Plugs, MSD Ext. Coil, 935 CAI, Spoon VTEC controller, Fluidyne Rad, Sparco pedals & shift **** & Sprint Seat, Sabelt 4pt belt, 935 Short Shift, Feels brake lines, Feels F slotted rotors, Fast Brakes rear brake kit, AEM Pads & Porterfield R Pads(for track), JDM SiR Steering wheel
Thread
Thread Starter
Forum
Replies
Last Post
1FSTREX
NorCal Classifieds
11
Dec 8, 2010 05:05 PM
1FSTREX
NorCal Classifieds
22
Aug 3, 2009 11:23 PM
StiBoyz
For Sale by Members
2
Jan 10, 2003 10:39 AM




