Fender roller, anyone need to use it?
#78
VIP Member
iTrader: (7)
Join Date: Dec 2002
Location: Stockholm
Posts: 7,441
Car Info: 2018 Golf R Variant
However... FYI - your rear "fender" is your quarter panel. So, if you are doing the fronts ONLY then sure - you would be nowhere near the rear quarter panel. But on an RS coupe, which is the car in question, when I put larger tires on, there were no clearance issues in the front - only the rear, which has very much to do with the quarter panels.
Last edited by wombatsauce; 03-20-2008 at 02:29 PM.
#83
Registered User
iTrader: (16)
Join Date: Jul 2005
Location: Bay Area, CA
Posts: 925
Car Info: 05 Saab 92x
Ben's da man! Rolled one front fender for me like he's been doing it for a week. Too bad when I did my other front fender, I crizzacked the paint. Oh well, that fender has some boo-boo that needs some paint attention anyhow.
Thanks again for hosting this Ben! Luckily we didn't get any harrasment from the Police that was chilling around the corner as we took off.
Thanks again for hosting this Ben! Luckily we didn't get any harrasment from the Police that was chilling around the corner as we took off.
#84
Registered User
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: North Bay
Posts: 208
Car Info: 02 Bugeye STI, 07 Forester XT 18GXT-R
I should have PM'd him since it pertains specifically to his car and what was done to it in the past.
However... FYI - your rear "fender" is your quarter panel. So, if you are doing the fronts ONLY then sure - you would be nowhere near the rear quarter panel. But on an RS coupe, which is the car in question, when I put larger tires on, there were no clearance issues in the front - only the rear, which has very much to do with the quarter panels.
However... FYI - your rear "fender" is your quarter panel. So, if you are doing the fronts ONLY then sure - you would be nowhere near the rear quarter panel. But on an RS coupe, which is the car in question, when I put larger tires on, there were no clearance issues in the front - only the rear, which has very much to do with the quarter panels.
#85
VIP Member
iTrader: (7)
Join Date: Dec 2002
Location: Stockholm
Posts: 7,441
Car Info: 2018 Golf R Variant
You also said "fender lip" not "front fender lip only" and since lots of people refer to the rear quarter panel as the "rear fender" it is unclear that you are doing this on the front only - not that it matters.
Just want to add that it's pretty awesome that you are doing this for people!
#86
Registered User
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: North Bay
Posts: 208
Car Info: 02 Bugeye STI, 07 Forester XT 18GXT-R
My post that you quoted there and the PM I sent you both mention that THIS IS REGARDING HIS SPECIFIC CAR. I will go back and edit my posts in an effort to stop this confusion. Again, I should have sent chochocho a PM but for some reason I did not. I am sorry. Yes, many an RS Coupe has rolled rear quarter panel openings, just like the one I am talking about here.
You also said "fender lip" not "front fender lip only" and since lots of people refer to the rear quarter panel as the "rear fender" it is unclear that you are doing this on the front only - not that it matters.
Just want to add that it's pretty awesome that you are doing this for people!
You also said "fender lip" not "front fender lip only" and since lots of people refer to the rear quarter panel as the "rear fender" it is unclear that you are doing this on the front only - not that it matters.
Just want to add that it's pretty awesome that you are doing this for people!
#87
VIP Member
iTrader: (7)
Join Date: Dec 2002
Location: Stockholm
Posts: 7,441
Car Info: 2018 Golf R Variant
No worries, and not pissed at all. It was dumb of me to post that, and I should have just done a PM to chochocho in the first place. Just wanted to make sure you knew I was talking about a particular car and not all cars.
Thread
Thread Starter
Forum
Replies
Last Post
dynamicprojeKtz
Bay Area
22
04-24-2007 11:06 PM