Car Plans for 2007
Registered User
iTrader: (7)
Joined: Dec 2004
Posts: 802
From: San Luis Obispo (school), Los Altos (home)
Car Info: 03 Cummins, 99 miata, 91 v8 miata, 90 spec miata
Done so far in 2007:
FP Evo3 16g
Titek Uppipe
Deaschwerks 565cc injectors
Walbro Fuel Pump
TGV delete
eBay TMIC
Accessport V2
Tune by Mike at GST
Perrin rear endlinks
Perrin front endlinks
Carbon STi scoop
Planned:
4 or 6 pt harnesses
New sub(s)
Possible fiberglass sub enclosure for spare tire area, flush mounted with floor of trunk
more Wheels/tires/alignment?
Wingless
Possibly seats
As much track time as possible
FP Evo3 16g
Titek Uppipe
Deaschwerks 565cc injectors
Walbro Fuel Pump
TGV delete
eBay TMIC
Accessport V2
Tune by Mike at GST
Perrin rear endlinks
Perrin front endlinks
Carbon STi scoop
Planned:
4 or 6 pt harnesses
New sub(s)
Possible fiberglass sub enclosure for spare tire area, flush mounted with floor of trunk
more Wheels/tires/alignment?
Wingless
Possibly seats
As much track time as possible
Registered User
Joined: Mar 2006
Posts: 1,136
From: Seattle WA.
Car Info: 05 WRX 4EAT (VF34'd and FMIC'd)----sold :(
Well after a lil over a year of owning my car, I'll hopefully be stage 2 some time by the end of this week! w00t w00t!
Mods:
HKS: up-pipe, hi-power exh.
Megan racing dp (catless)
V.1 cobb AP
Then maybe down the line:
Lowering springs ( tein maybe?)
Wheels and tires ( Volks would be nice but not with my job
)
Sway bars
STi side splitters
Rear Apron(s)
But I'll be happy if the car is still in one piece.
lol
Mods:
HKS: up-pipe, hi-power exh.
Megan racing dp (catless)
V.1 cobb AP
Then maybe down the line:
Lowering springs ( tein maybe?)
Wheels and tires ( Volks would be nice but not with my job
)Sway bars
STi side splitters
Rear Apron(s)
But I'll be happy if the car is still in one piece.
lol
Registered User
iTrader: (2)
Joined: Aug 2006
Posts: 728
From: Seattle, WA
Car Info: 2004 Aspen White WRX
First: New brakes! SS lines, Hawk HP+ pads, ATE Super Blue, Brembo rotors
Then: Swaybars and endlinks, f/r strut bar! Oh, and Schroth Ralley4 harness (anyone have one for sale?)
Next: AP V2, turbo-back exhaust, camber bolts
Maybe: Kartboy SSK and bushings, new pulleys, STi motor/tranny mounts
Yup, there's prolly more too...
Then: Swaybars and endlinks, f/r strut bar! Oh, and Schroth Ralley4 harness (anyone have one for sale?)
Next: AP V2, turbo-back exhaust, camber bolts
Maybe: Kartboy SSK and bushings, new pulleys, STi motor/tranny mounts
Yup, there's prolly more too...
VIP Member
iTrader: (4)
Joined: Apr 2006
Posts: 3,632
From: Yokosuka, Japan
Car Info: 2008 EVO X/1991 Nissan Skyline GT-R32
done so far, tune by Mike at GST
Steering bushings
Shifter bushings
original plan:
td06 20g 8cm housing
stoptech rotors
porterfield brake pads
stainless steel brake lines
new clutch
change of plans:
just got orders to Kuwait for 7 months
new plan:
drive car as is until May
Park
I love the military
Steering bushings
Shifter bushings
original plan:
td06 20g 8cm housing
stoptech rotors
porterfield brake pads
stainless steel brake lines
new clutch
change of plans:
just got orders to Kuwait for 7 months
new plan:
drive car as is until May
Park
I love the military
Registered User
Joined: Jul 2006
Posts: 265
From: California
Pro-tuned stage 2 for the STI, also maybe a 1DIN headunit, looking at the newer Alpine Ipod connected ones. Maybe shifter/transmission bushings...gotta get rid of this shifter play...blah.
For the civic, dunno, hopefully wash it.
For the civic, dunno, hopefully wash it.
VIP Member
iTrader: (17)
Joined: May 2005
Posts: 22,776
From: Sunnyvale, CA
Car Info: '13 BRZ Limited / '02 WRX
nice work ripping off my thread hugo 
I plan to put in the 5-speed an get the protune maps tweaked for a little more power after that. After that its cosmetic stuff including cashing the insurance check to get the scratch/dent in the rear fixed and paint the morettes at the same time. After that new Hella fogs since one of the stock ones is out and hopefully finally find someone to build the light bar
after that if I find some yosemite sam mudflaps and the template to make the mounting hardware....I'll have some yosemite same mudflaps
I plan to put in the 5-speed an get the protune maps tweaked for a little more power after that. After that its cosmetic stuff including cashing the insurance check to get the scratch/dent in the rear fixed and paint the morettes at the same time. After that new Hella fogs since one of the stock ones is out and hopefully finally find someone to build the light bar
after that if I find some yosemite sam mudflaps and the template to make the mounting hardware....I'll have some yosemite same mudflaps
Chicks dig me. April Fool's!
iTrader: (31)
Joined: Apr 2006
Posts: 10,989
From: Fremont, CA
Car Info: 1997 Impreza, 2014 BRZ
