BAM X: Car Show FINALIST (PLEASE READ & RESPOND IF YOU ARE A FINALIST)

Thread Tools
 
Search this Thread
 
Old Sep 9, 2010 | 10:38 AM
  #106  
MonsterGC's Avatar
Registered User
iTrader: (6)
 
Joined: Jul 2008
Posts: 2,704
From: SF, CA
Car Info: 2000 2.5rs
Exterior
-ver5/6 front
-JDM Aluminum hood =D
-JDM Auto Folding Mirrors (need to rewire them =[ )
-Prodrive RB5 Seibon Cf rep spoiler (painted)
-S201 CF scoop
-JDM tail lights
-JDM rear spats painted
-pink Subaru badge
-tinted yellow fogs
-depo clear corners
-Amber corners (using these now)
-v5/6 front lip
-painted the vent black
-Side Skirts Painted
-fog light covers (rarely use them)
-TURBO induction scoop! (Prodrive calls it intake scoop)
-Silver HellaTones made in Germany! =D
-6k HIDs
-Rally Armor mudflaps

Sometime Soon
-Jdm bumper beams (might go front mount one day)
-Roll or cut my fenders or fender flares! =]
-Aeroism CF roof

Interior
-ARC Titanium Shift ****
-Prodrive Floor Mats
-Prodrive Shift ****
-stock rs interior
-Corbeau Forza bucket seat(TRADED to Azer)
-Prodrive bucket seat
-Sti Front Seats
-04 wrx momo steering wheel
-Prodrive works bell hub and quick release
-Prodrive steering wheel
-Works Bell short hub
-Alcantara shift boot
-RIPT black micro suede overlays
-Wrx rainbow rear seats with pass through
-Wrx 6 cd changer
-Infinity References all around
-BIGGO battery in the trunk! 900CCA =]
Sometime Soon
-Roll Cage or Frame injection
-Sabelt or Prodrive Harness


Engine
-06 WRX Motor
-legacy turbo crossmember
-Grimmspeed 160 T-stat
-2nd Motor about 30k (rebuilt) DISASSEMBLED
-Cobb CAI SOLD
-Borla Reps SOLD
-Tanabe Hyper Medallion Full Exhaust (SOLD)
-Greddy SP2
-Cosworth air pump block off plate
-Prodrive 3-port boost solenoid
-vf39
-catless uppipe
-helix catless downpipe
-samco y-pipe
-Cobb APv2
Sometime Soon
-at least 20g sized turbo etc
-build the motor!
-cusco motor mounts

Transmission
-Cusco tranny mount
-ACT HD Clutch(Sold)
-ACT lightweight flywheel (Sold)
-Kartboy short shifter and shifter bushings
-RS 5-speed
-RS Lsd
-Z1 Auto Stainless Steel Clutch Line
-Sti 6-speed drivetrain with dccd
Sometime Soon
-ppg or andrewtech gears

Suspension
-JDM type-ra pinks
-Stance GR+ 8k 6k (SOLD to SircleSam)
-Prodrive Coilovers 10k 8k (560/448)
-Bakemono rear camber plates
-JDM Aluminum Control Arms
-Whiteline steeringrack bushings
-Whiteline Roll Center Kit
-Jdm sti ALK
-Cusco Adj rear sways 22-24mm
-Cusco Rear strut bar with V-Brace
-Jdm Sti cf front strut bar
-stock 19mm front sway
-sti spherical front endlinks
-Falken Azenis RT-615s
-Rays 57Motorsports G07WT 17x8 +45
-Project Kics R40 neochrome lugnuts
-Brembos F&R
-Godspeed rear brembo conversion kit
-Goodridge SS lines
-Prodrive Rear diff cover
Sometime Soon
-Cusco Adj Lateral links
-Cusco chassis bracing
-Roll Cage
-H brace
-Prodrive Alcon BBK
-Subframe lock
-More bushings!

Last edited by MonsterGC; Sep 9, 2010 at 10:42 AM.
Old Sep 9, 2010 | 10:47 AM
  #107  
03'EyeBug's Avatar
Registered User
iTrader: (17)
 
Joined: Nov 2009
Posts: 2,501
From: CA
Car Info: WRB 03(sold) AW 03(sold) 02 Taco!
Originally Posted by a.v.e.
yay, i got the day off. I had to use my pto hours though. All good, i get paid to hang out with my suby family
yay!
Old Sep 9, 2010 | 10:49 AM
  #108  
stupidchicken03's Avatar
Churro Aficionado
iTrader: (38)
 
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL
it would HELLA suck to put all the time/effort into putting a lot of this on, and then not be able to make it.. I would be in a ****ty mood all day at work
Old Sep 9, 2010 | 12:05 PM
  #109  
enkeiandmore's Avatar
Registered User
iTrader: (3)
 
Joined: Oct 2006
Posts: 631
From: san jose,ca
Car Info: 07 legacy
looks like i will be coming out to bam but with 1-2 extra people. my mods list is short so here we go

BC coilovers 6/8k
Cusco f/r sway bars
OZ super leggera 18x8
custom exhaust with x02 cans
Sparco Torino II
Jddm legacy grill which doesnt fit that well
and a lot of pedobear stickers
Old Sep 9, 2010 | 02:31 PM
  #110  
A.V.E.'s Avatar
Thread Starter
VIP Member
iTrader: (24)
 
Joined: Dec 2004
Posts: 9,540
From: Wheeldude.com
Car Info: RIP: 04 WRB SEDAN Now Rollin' in STi
exactly, plus i wouldnt want to give all the work to oh 4 panda on top of that, theres the events already going on... thats a lot of work to do.

Originally Posted by stupidchicken03
it would HELLA suck to put all the time/effort into putting a lot of this on, and then not be able to make it.. I would be in a ****ty mood all day at work
Old Sep 9, 2010 | 02:49 PM
  #111  
hwob90's Avatar
Registered User
iTrader: (24)
 
Joined: Jan 2007
Posts: 1,831
From: Walnut Creek/BayArea, CA
Car Info: 2009 WRB WRX Sedan
Glad to see that you can go AVE looking forward to seeing you and everyone else there.
Old Sep 9, 2010 | 03:01 PM
  #112  
Static Fitment's Avatar
Registered User
iTrader: (18)
 
Joined: Aug 2009
Posts: 1,713
From: Valley
Car Info: E85 Tuned
AVE I pmed you last night
Old Sep 9, 2010 | 03:24 PM
  #113  
stupidchicken03's Avatar
Churro Aficionado
iTrader: (38)
 
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL
Originally Posted by A.V.E.
exactly, plus i wouldnt want to give all the work to oh 4 panda on top of that, theres the events already going on... thats a lot of work to do.
for sure
Old Sep 9, 2010 | 04:10 PM
  #114  
A.V.E.'s Avatar
Thread Starter
VIP Member
iTrader: (24)
 
Joined: Dec 2004
Posts: 9,540
From: Wheeldude.com
Car Info: RIP: 04 WRB SEDAN Now Rollin' in STi
yes sir, i got it. also got your FB request

Originally Posted by CornFed
AVE I pmed you last night
Old Sep 9, 2010 | 07:42 PM
  #115  
AdamBOMB_STi's Avatar
Registered User
iTrader: (4)
 
Joined: Nov 2005
Posts: 1,432
From: San Jose, CA
Car Info: 04.7 AW Time Attack STi
Engine:
Modified original EJ257 longblock
Darton ductile iron sleeves w/copper O-rings
Balanced & polished stock STi crank
Manley Forged H-Beam Rods
Wiseco forged pistons
ACL Race Bearings
ARP L19 Headstuds
Fluidamper
Modified 11mm oil pump
P&P Cylinder heads
Supertech +1mm SS & inconel valves
Ferrea dual valve springs, spring seats and retainers
Custom Kelford AVCS Cams (276 in, 272 ex)
Custom made equal length header, rotated uppipe and downpipe
Garrett GT35R turbo w/ .82 Tial hotside
Tial 44mm WG
Tial 50mm BOV
Perrin Stealth exhaust
Hydra Nemesis 2.6 EMS w/WB02
APS DR525 FMIC w/custom upper piping
Crucial Racing TGV Deletes
Bosch 1600cc injectors
Aeromotive Top Feed rails with custom machined brackets
Aeromotive FPR
Hallman Pro RX MBC
NGK copper spark plugs
PWR aluminum radiator
Samco radiator hoses
Crucial Racing 160 degree thermostat
A/C system removed
Cusco Engine and tranny mounts
APR Performance CF radiator shroud
Mocal oil cooler and sandwich adapter
Stainless Steel allen head hardware throughout engine bay
Peterson baffled catch can; customized with extra -8an fitting and bracket
1.75L fuel swirl pot
Aeromotive A1000 Fuel pump
Fuelab 828 10 micron filter
Custom -6 and -8AN Fuel lines

Drivetrain:
RPS Max 6-puck clutch
Goodrich SS clutch line
Clutch delay valve delete
TIC Klunk Killer
Kartboy SS with F&R bushings
Motul Gear 300 fluid in tranny
OEM Subaru LSD oil in rear diff

Brakes:
Racing Brake ET800 Pads F&R
Goodrich SS lines
ATE Super Blue Fluid

Suspension:
07 STi 5x114.3 hub conversion
Custom Ground Control/koni double adjustable coilovers; 550/500 spring rates
Ground Control front camber plates
Cusco rear camber plates customized with Ground Control pillowballs
6 Gun Racing ball joint extenders
Cobb Sway bars
Kartboy rear endlinks
Whiteline steering rack bushings
Custom alignment/corner balance/ride height by Brandon Kraus of Roger Kraus Racing (camber: -3* front, -2* back; 0 toe F&R)

Wheels and tires:
Volk RE30 18x9.5" +35 offset in white
Bridgestone Potenza RE-01R 265/35/18
Project Kics R40 lug nuts

Exterior:
Zero/Sports full front bumper
Kaminari reverse cowl CF hood
Varis CF lightweight trunk
05 rear bumper and fender flares modified for more clearance; pic: Image hosting, free photo sharing & video sharing at Photobucket
HKS Kansai CF diffuser
WRX sideskirts
Rally Armor mudflaps (black lettering)
Lightwerks S2K retrofit w/ halos
Grimmspeed hood damper


Interior:
Recaro Profi SPG seats
Takata Harness
OMP Targa Steering wheel
Sparco Hub
LTB Motorsports QR
Zerosports triple gauge pod w/CF overlay
Defi Imperial Ambers: Boost, Oil pressure, Fuel pressure & EGT
Link "Knocklink" knock detection system
Beatrush bulkhead cover
Relocated battery box w/ Optima Blue battery
Gutted, shaved, and painted trunk area
Old Sep 9, 2010 | 07:45 PM
  #116  
glenspen's Avatar
VIP Member
iTrader: (3)
 
Joined: Feb 2005
Posts: 2,793
From: BAIC
Car Info: 05 WRX
Originally Posted by AdamBOMB_STi
Engine:
Modified original EJ257 longblock
Darton ductile iron sleeves w/copper O-rings
Balanced & polished stock STi crank
Manley Forged H-Beam Rods
Wiseco forged pistons
ACL Race Bearings
ARP L19 Headstuds
Fluidamper
Modified 11mm oil pump
P&P Cylinder heads
Supertech +1mm SS & inconel valves
Ferrea dual valve springs, spring seats and retainers
Custom Kelford AVCS Cams (276 in, 272 ex)
Custom made equal length header, rotated uppipe and downpipe
Garrett GT35R turbo w/ .82 Tial hotside
Tial 44mm WG
Tial 50mm BOV
Perrin Stealth exhaust
Hydra Nemesis 2.6 EMS w/WB02
APS DR525 FMIC w/custom upper piping
Crucial Racing TGV Deletes
Bosch 1600cc injectors
Aeromotive Top Feed rails with custom machined brackets
Aeromotive FPR
Hallman Pro RX MBC
NGK copper spark plugs
PWR aluminum radiator
Samco radiator hoses
Crucial Racing 160 degree thermostat
A/C system removed
Cusco Engine and tranny mounts
APR Performance CF radiator shroud
Mocal oil cooler and sandwich adapter
Stainless Steel allen head hardware throughout engine bay
Peterson baffled catch can; customized with extra -8an fitting and bracket
1.75L fuel swirl pot
Aeromotive A1000 Fuel pump
Fuelab 828 10 micron filter
Custom -6 and -8AN Fuel lines

Drivetrain:
RPS Max 6-puck clutch
Goodrich SS clutch line
Clutch delay valve delete
TIC Klunk Killer
Kartboy SS with F&R bushings
Motul Gear 300 fluid in tranny
OEM Subaru LSD oil in rear diff

Brakes:
Racing Brake ET800 Pads F&R
Goodrich SS lines
ATE Super Blue Fluid

Suspension:
07 STi 5x114.3 hub conversion
Custom Ground Control/koni double adjustable coilovers; 550/500 spring rates
Ground Control front camber plates
Cusco rear camber plates customized with Ground Control pillowballs
6 Gun Racing ball joint extenders
Cobb Sway bars
Kartboy rear endlinks
Whiteline steering rack bushings
Custom alignment/corner balance/ride height by Brandon Kraus of Roger Kraus Racing (camber: -3* front, -2* back; 0 toe F&R)

Wheels and tires:
Volk RE30 18x9.5" +35 offset in white
Bridgestone Potenza RE-01R 265/35/18
Project Kics R40 lug nuts

Exterior:
Zero/Sports full front bumper
Kaminari reverse cowl CF hood
Varis CF lightweight trunk
05 rear bumper and fender flares modified for more clearance; pic: Image hosting, free photo sharing & video sharing at Photobucket
HKS Kansai CF diffuser
WRX sideskirts
Rally Armor mudflaps (black lettering)
Lightwerks S2K retrofit w/ halos
Grimmspeed hood damper


Interior:
Recaro Profi SPG seats
Takata Harness
OMP Targa Steering wheel
Sparco Hub
LTB Motorsports QR
Zerosports triple gauge pod w/CF overlay
Defi Imperial Ambers: Boost, Oil pressure, Fuel pressure & EGT
Link "Knocklink" knock detection system
Beatrush bulkhead cover
Relocated battery box w/ Optima Blue battery
Gutted, shaved, and painted trunk area
That's one hell of a mod list..nice build, looks cool too.
Old Sep 9, 2010 | 09:35 PM
  #117  
FW Motorsports's Avatar
iClub Silver Vendor
iTrader: (25)
 
Joined: Nov 2002
Posts: 15,494
From: Participating in some Anarchy!
Car Info: 2005 LGT wagon
JDM turbo hood.
Jdm fenders, bumper pieces.
STi drive train(minus engine).
A ton of stuff I can't remember.
Old Sep 9, 2010 | 09:41 PM
  #118  
04caliwrx's Avatar
Registered User
iTrader: (6)
 
Joined: Mar 2006
Posts: 9,581
From: on the way to lake tahoe to shread! turbo beast
Car Info: 2016 WRX, 2014 lifter forester XT, 2005 JDM207 WGN
Originally Posted by Paul@dbtuned
JDM turbo hood.
Jdm fenders, bumper pieces.
STi drive train(minus engine).
A ton of stuff I can't remember.
Same with me Paul... when you have so man mods it hard to know a lot of that smalls stuff that easy to forget about the small things haha. I know I'm gonna have to look at my engine build list to see most of my parts!!

Adam the car still look great!!! and that mod list you have makes my cars mod list look like it's stage 2 haha
Old Sep 9, 2010 | 09:42 PM
  #119  
03'EyeBug's Avatar
Registered User
iTrader: (17)
 
Joined: Nov 2009
Posts: 2,501
From: CA
Car Info: WRB 03(sold) AW 03(sold) 02 Taco!
Originally Posted by Paul@dbtuned
JDM turbo hood.
Jdm fenders, bumper pieces.
STi drive train(minus engine).
A ton of stuff I can't remember.
You forgot the love stains in the back seat, off the top of my head...no pun intended.
Old Sep 9, 2010 | 10:37 PM
  #120  
stupidchicken03's Avatar
Churro Aficionado
iTrader: (38)
 
Joined: Feb 2008
Posts: 54,661
From: IG - @thomas.teammoist
Car Info: IG - @TEAMMOISTOFFICIAL



All times are GMT -7. The time now is 06:06 PM.