any place to p&p intake manifold?
Thread Starter
Registered User
Joined: Nov 2002
Posts: 978
From: ur mom
Car Info: ugly piece of ****
any place to p&p intake manifold?
Before I put this new intake manifold in, I want to get it ported. Any machine shops recommended in here? Id also want to drop off the throttle body as well... Thoughts?
Registered User
iTrader: (1)
Joined: Apr 2006
Posts: 2,206
From: Patterson, CA
Car Info: your sister crazy.
There's not much porting to do on the 02 intake mani. Mostly just sanding/polishing all those nasty casting marks and the rough inside of each runner. You can easily do this if you have access to a pneumatic die grinder and a couple of 80 grit or so flapper drums.
When I say there's not much porting to be done is bc the intakemanifold-TGV gasket is pretty damn near on. If you have a intake gasket handy, lay it over the surface and see how much you have to work with. When doing that, you'll need to do the same for the top of the TGV also. Any questions abt it, PM me on this SN.
O and I have done TBs before also. There's a good amount to be taken off there and some careful knife-edging on the butterfly.
When I say there's not much porting to be done is bc the intakemanifold-TGV gasket is pretty damn near on. If you have a intake gasket handy, lay it over the surface and see how much you have to work with. When doing that, you'll need to do the same for the top of the TGV also. Any questions abt it, PM me on this SN.
O and I have done TBs before also. There's a good amount to be taken off there and some careful knife-edging on the butterfly.
Last edited by Woodward06; Aug 18, 2009 at 05:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
castro
NorCal Classifieds
2
Apr 14, 2008 09:52 PM
Renick Motorsports
Engine and Drivetrain
0
Sep 23, 2006 11:29 PM
Imprezer
Used Aftermarket Car Parts For Sale
8
Sep 7, 2004 07:36 AM
