Oil pan
10-22-2003, 02:54 PM
#1
Guest
Posts: n/a
Oil pan
I have changed the position of the oil return line from the bottom to the top oil pan. It seems to work for now because I also lower the boost, but I think I may build a custom oil pan.
Thx for the replys guys...
Thx for the replys guys...
Last edited by NOS25RS; 10-22-2003 at 02:58 PM.
10-22-2003, 03:48 PM
#2
Admin v2.0
iTrader: (9)
Join Date: Nov 2002
Location: Alameda, CA, USA
Posts: 6,965
Car Info: 02 Black Legacy GT
The best thing to do is to get an ARC oil pan. I ordered one for myself and waiting to install it.
The pan has increased capacity (by about 800cc) and is made from cast aluminum. It also features heat exhanger fins.
Increased capacity.
Increased cooling efficiency.
2 drain plungs (one of which can be used for return or oil temp sensor).
They run about $400-$500 depending where you get them.
- Alex
The pan has increased capacity (by about 800cc) and is made from cast aluminum. It also features heat exhanger fins.
Increased capacity.
Increased cooling efficiency.
2 drain plungs (one of which can be used for return or oil temp sensor).
They run about $400-$500 depending where you get them.
- Alex
Thread
Thread Starter
Forum
Replies
Last Post
1JavaBlk_in_Sac
NorCal Classifieds
7
03-05-2013 05:03 PM
1JavaBlk_in_Sac
NorCal Classifieds
0
03-19-2012 11:29 AM
chakming888
NorCal Classifieds
1
10-31-2010 10:20 PM
megapixel
NorCal Classifieds
3
07-23-2009 08:16 PM