My built wagon thread
#91
Registered User
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Pacifica
Posts: 699
Car Info: 04 wagon
There's some bigger sizes on my flicker account https://www.flickr.com/photos/ddavis...7648410484462/
#93
Registered User
iTrader: (4)
Join Date: Oct 2013
Location: San Jose
Posts: 62
Car Info: 2004 aspen white WRX
There's some bigger sizes on my flicker account https://www.flickr.com/photos/ddavis...7648410484462/
#98
Registered User
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Pacifica
Posts: 699
Car Info: 04 wagon
Fun time out at Thunderhill today with the car. First time out over there. It couldn't have gone better. Car tested great and the 5mile track was awesome!
Shoutout to Dito Milian at gotbluemilk for some nice shots of the wagon in action.
Shoutout to Dito Milian at gotbluemilk for some nice shots of the wagon in action.
Last edited by ddavis; 10-26-2014 at 08:38 AM.
#102
Registered User
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Pacifica
Posts: 699
Car Info: 04 wagon
Also love the way the RS looks flared. I have 2000 myself. Im keeping mine completely stock since I already have the wrx to play with or I would of already slapped some flares on it.
#103
Registered User
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Pacifica
Posts: 699
Car Info: 04 wagon
Today I started working on modifying a rear diffuser fit on the wagon. Still a ways to go but here's a few pics along the way.
- Moved the charcoal canister up & angled for clearance
- Cut bumper cover so the diffuser can sit flush
- Drilled & installed some pronged nuts into the bumper for mounting
- Drilled holes in the spare tire section and installed long spacers/bolts for mounting.
- Reinforced the fins with L brackets
- Molded the diffuser to the bumper some with a heat gun.
Now I just need to trim the exhaust hole, paint it, and it should be good to go.
- Moved the charcoal canister up & angled for clearance
- Cut bumper cover so the diffuser can sit flush
- Drilled & installed some pronged nuts into the bumper for mounting
- Drilled holes in the spare tire section and installed long spacers/bolts for mounting.
- Reinforced the fins with L brackets
- Molded the diffuser to the bumper some with a heat gun.
Now I just need to trim the exhaust hole, paint it, and it should be good to go.
Last edited by ddavis; 01-02-2015 at 08:54 AM.
#105
Registered User
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Pacifica
Posts: 699
Car Info: 04 wagon
Its a frp hks kansai. I picked it up for a good price since i new I would need to cut it up a bit to work. Hoping to get it mounted later on today before I paint it.
Last edited by ddavis; 01-04-2015 at 10:20 PM.