MNBodyMan
02-28-2004, 08:30 PM
Price Lowered!
To my dismay, I'm being forced to sell my 2002 Subaru Impreza WRX Wagon. It only has 16,000 miles clocked on it. I bought it originally as a personal project. When i bought the car it had a salvage title, which means you have to get it inspected after you fix it to recieve a normal title again. It had been hit in the front end and both airbags had gone off. Luckily the side air bags were untouched. I halfway completed the project before I ran out of time and funds. The following items have already been replaced with new parts:
Drivers Side Air Bag
Rear Passenger Side Door Complete
Complete Steering Wheel
Timing Belt
All timing covers.
Accesory belts
I have done most of the major frame work already. As you can see in the pictures the front end is almost completely disasembled. It will probably need one more hour of pulling on a frame rack. It's very close to being perfect. As is sits the front beam will sit on, I just want this car to be perfectly lined up. Before I started the project I bought almost all of the parts I needed. They will all be included with the car. The following parts will be included:
Front Bumper
Rear Bumper
Passenger Side Fender
Drivers Side Fender
Headlights
Foglights
Front Support Beam
Front Support Foam
Complete Core Support (4 pieces)
Lower Radiator Brace
Radiator Brackets
Radiator
Condensor
Radiator Fans (2)
Radiator Shrouds (2)
Oil Cooler
Oil Cooler Support Bolt
Bumper brackets (2)
New Subframe
Transverse Link Assembly (control arm)
Sway bar end link
Misc. Sway bar parts
Tie Rod End
Misc. Suspension Bolts
Side Skirts (2)
This includes most of the parts you will need. Here is a list of the ones you will for sure still need to buy to complete everything:
Hood
Wheel and tire
Passenger Side Air Bag
Crossmember
Front Air Bag Sensors
This car will be a great deal for anybody to fix up and drive. Remember the wagon only weighs 80 pounds more than the sedan. I wish I could keep it for myself. I will be losing money on this project so I hope it goes to a good home where it gets finished properly. As it sits I have done the bodywork to the doors and the rear hatch. The doors are in PPG primer right now ready to be painted. I have receipts for all the parts I have bought. It will also come with Minnesota license plates with good tabs. All registration information will be also included. It will need to be towed wherever it ends up. Right now I'm asking $8,900 or best offer for everything included. Email me with any questions. Thanks.
http://home.comcast.net/~tmdunklee/ebay/wrx.jpg http://home.comcast.net/~tmdunklee/ebay/wrx2.jpg http://home.comcast.net/~tmdunklee/ebay/junkyard.jpg
To my dismay, I'm being forced to sell my 2002 Subaru Impreza WRX Wagon. It only has 16,000 miles clocked on it. I bought it originally as a personal project. When i bought the car it had a salvage title, which means you have to get it inspected after you fix it to recieve a normal title again. It had been hit in the front end and both airbags had gone off. Luckily the side air bags were untouched. I halfway completed the project before I ran out of time and funds. The following items have already been replaced with new parts:
Drivers Side Air Bag
Rear Passenger Side Door Complete
Complete Steering Wheel
Timing Belt
All timing covers.
Accesory belts
I have done most of the major frame work already. As you can see in the pictures the front end is almost completely disasembled. It will probably need one more hour of pulling on a frame rack. It's very close to being perfect. As is sits the front beam will sit on, I just want this car to be perfectly lined up. Before I started the project I bought almost all of the parts I needed. They will all be included with the car. The following parts will be included:
Front Bumper
Rear Bumper
Passenger Side Fender
Drivers Side Fender
Headlights
Foglights
Front Support Beam
Front Support Foam
Complete Core Support (4 pieces)
Lower Radiator Brace
Radiator Brackets
Radiator
Condensor
Radiator Fans (2)
Radiator Shrouds (2)
Oil Cooler
Oil Cooler Support Bolt
Bumper brackets (2)
New Subframe
Transverse Link Assembly (control arm)
Sway bar end link
Misc. Sway bar parts
Tie Rod End
Misc. Suspension Bolts
Side Skirts (2)
This includes most of the parts you will need. Here is a list of the ones you will for sure still need to buy to complete everything:
Hood
Wheel and tire
Passenger Side Air Bag
Crossmember
Front Air Bag Sensors
This car will be a great deal for anybody to fix up and drive. Remember the wagon only weighs 80 pounds more than the sedan. I wish I could keep it for myself. I will be losing money on this project so I hope it goes to a good home where it gets finished properly. As it sits I have done the bodywork to the doors and the rear hatch. The doors are in PPG primer right now ready to be painted. I have receipts for all the parts I have bought. It will also come with Minnesota license plates with good tabs. All registration information will be also included. It will need to be towed wherever it ends up. Right now I'm asking $8,900 or best offer for everything included. Email me with any questions. Thanks.
http://home.comcast.net/~tmdunklee/ebay/wrx.jpg http://home.comcast.net/~tmdunklee/ebay/wrx2.jpg http://home.comcast.net/~tmdunklee/ebay/junkyard.jpg