hey guys just came back from the track ran a 15.1 all motor in my 98rs

impressive time, what was the breakdown of the run, 60', 660', etc.? That's about a half second off of a bone stock RS from what I've seen.

my 60ft was a 2.1 and the best i ever ran the car when it was bone stock was a 16.1, sport compact ran a bone stock 99 rs at a 16 flat , i wanna run the car 14's with just bolt ons but i only got one bolt on left (pulleys iam hoping that will do it.

Get a sub 2 second 60' and you should be able to run high 14s. I ran a 15.005 with just an intake.

R/T--------.610
60'--------1.979
330'------6.039
1/8-------9.465 at 71.37 mph
1000'----12.459
1/4--------15.005 at 88.51 mph

What rpm where you launching at?

Around 4k, let me give you a rundown of everything.

My car is completely stock except for an Injen intake. I removed my spare tire, jack, and the front plates that block the hood scoop and vents. Other then that, the car is stock. Also had 3/4 tank of gas. Running Big O brand touring tires. I launched at around 4k and shifted near redline. When I shifted, I let part way off the gas and floored it again after the shift.

R/T--------.610
60'--------1.979
330'------6.039
1/8-------9.465 at 71.37 mph
1000'----12.459
1/4--------15.005 at 88.51 mph

This time was put down at Portland International Raceway, Portland, OR. Temp was in the 50s, medium humidty as it rained an hour after this pass. Portland is about 60 ft above sea level. Depending where you are at, that could kill your times.

The RS must really respond to an intake because the one I raced had a K&N drop in only and ran 15.60 at Houston Raceway Park which is about 50-60ft above sea level. Here is the timeslip of the RS.

60': 2.058
330': 6.281
1/8: 9.851 @ 69.14
1000': 12.959
1/4: 15.604 @ 85.07