ChronicSystems
12-03-2002, 06:10 PM
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/profec_e_01.jpg
Brand new from Greddy! The Multi-Function/Display Boost Controller. The Profec E-01.
I-Club Price $570 shipped! We have 15 in stock! MSRP is $680
Has a multifunction display that you can dash mount or custom install anywhere in the vehicle. Has a seperate remote controller to adjust settings. Uses a SD Memory Card. Has the ability to connect to a Greddy Emanage system for further tuning, such as air/fuel.
Meter display features analog and digital display for boost, rpm, throttle position.
Displays Emanage injector maps for air/fuel adjustments.
High and low boost settings.
Graphing function.
GReddy PRofec e-01
This latest model boost controller features following things.
* EL large screen to check all the information accurately.
* High sensitive pressure sensor measures up to 300 kpa of boost.
* Compact solenoid valve allows you to install it anywhere you want.
* Boost control function can be chosen from AUTO or MANUAL mode.
* To obtain steady boost pressure, this boost controller features GAIN function.
* Start-Boost-function allows you to adjust how quickly you want that boost.
* By inputting individual boost correction on each engine rpm, you can set boost more precisely.
* Peak-Hold-function shows maximum boost in the screen, which have been recorded so far.
* Warning-function alarms you by LED and beep sound when the actual boost becomes over the set boost.
* Limiter-function decreases boost to the point you set when the actual boost becomes over the warning boost.
* Each data and program are recorded in SD card. It enables the system to be upgraded in the future.
* By using USB cable (not included in the kit), this boost controller can work with GReddy e-manage. Even if you don't have lap-top computer, you can set the data of e-manage and also save it by using the hand-set.
* All the data on the screen can be recorded and you can play-back them later. MAP-trace-function of e-manage can be recorded and played-back as well.
* If you purchase an optional pressure sensor harness, you can use the pressure sensor in this kit with e-manage, etc...
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/e-01_map.jpg
Types of configuration you can setup with it.
Several pictures of the multi function display.
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/03pc.gif
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/04pc.gif
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/05pc.gif
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/06pc.gif
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/07pc.gif
Brand new from Greddy! The Multi-Function/Display Boost Controller. The Profec E-01.
I-Club Price $570 shipped! We have 15 in stock! MSRP is $680
Has a multifunction display that you can dash mount or custom install anywhere in the vehicle. Has a seperate remote controller to adjust settings. Uses a SD Memory Card. Has the ability to connect to a Greddy Emanage system for further tuning, such as air/fuel.
Meter display features analog and digital display for boost, rpm, throttle position.
Displays Emanage injector maps for air/fuel adjustments.
High and low boost settings.
Graphing function.
GReddy PRofec e-01
This latest model boost controller features following things.
* EL large screen to check all the information accurately.
* High sensitive pressure sensor measures up to 300 kpa of boost.
* Compact solenoid valve allows you to install it anywhere you want.
* Boost control function can be chosen from AUTO or MANUAL mode.
* To obtain steady boost pressure, this boost controller features GAIN function.
* Start-Boost-function allows you to adjust how quickly you want that boost.
* By inputting individual boost correction on each engine rpm, you can set boost more precisely.
* Peak-Hold-function shows maximum boost in the screen, which have been recorded so far.
* Warning-function alarms you by LED and beep sound when the actual boost becomes over the set boost.
* Limiter-function decreases boost to the point you set when the actual boost becomes over the warning boost.
* Each data and program are recorded in SD card. It enables the system to be upgraded in the future.
* By using USB cable (not included in the kit), this boost controller can work with GReddy e-manage. Even if you don't have lap-top computer, you can set the data of e-manage and also save it by using the hand-set.
* All the data on the screen can be recorded and you can play-back them later. MAP-trace-function of e-manage can be recorded and played-back as well.
* If you purchase an optional pressure sensor harness, you can use the pressure sensor in this kit with e-manage, etc...
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/e-01_map.jpg
Types of configuration you can setup with it.
Several pictures of the multi function display.
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/03pc.gif
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/04pc.gif
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/05pc.gif
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/06pc.gif
http://www.chronic-systems.com/inventory/greddy/boostcontrollers/e-01/07pc.gif