when i trying to clean my engine bay, saw this hose cracked....anyone know where can i get this? and hard to replace?
http://i157.photobucket.com/albums/t44/fm725fm/P1020697.jpg
http://i157.photobucket.com/albums/t44/fm725fm/P1020698.jpg

thats the y-pipe, easy as hell to replace, just get an after market one

is there any size different? angle? i need to take off the tmic to replace that right? any link to that product?

they can be found here

http://www.subydude.com/osc/index.php/cPath/220_87_109?osCsid=9bfbb467423dac7cd6b76171eabe53b0

to remove the intercooler remove all the little black hoses attached to it and loosen the clasp on that cracked hose as well as the same clasp on the top of the short hose that connects the intercooler to the intake manifold. Then undo the two bolts (one bolt on either side)and wiggle the intercooler up and to the right (away from the turbo and the intake manifold). Once you flip of the intercooler, the y-pipe should be pretty easy to take off. Install the intercooler in the reverse order, make sure you reattach all hoses

http://www.subydude.com/osc/product_info.php/cPath/220_87_109/products_id/120?osCsid=9bfbb467423dac7cd6b76171eabe53b0

so i need to get this right?

that one, along with any of the other y-pipes on the page will work

I thought that the STI intercooler has a different Y-pipe than the WRX?

I thought that the STI intercooler has a different Y-pipe than the WRX?

thats actually very true, hopefully the original poster found that out before hand and got the correct part

I dont think that will leak

put it under boost and see what happens