anyone have the manuals? if so, can you scan in the pages that have the ecu pinouts on them? i need to install a few apexi computers, and labor is gonna be an arm and a leg, so i would much rather do it myself, just dont want to pay 290 for manuals im probably only going to use once either. thanks

Check out this link, you may find some help here
http://www.ravensblade-impreza.com/...ing/wiring.html
good luck.............;)

bump

broke down and bought books
Signal (Voltage)
Wire/Sensor Connector # Terminal # Ignition ON Engine ON Wire Color Note
Throttle Position Sensor B136 17 Fully Closed: 0.2-1.0 Grey
Fully Opened: 4.2-4.7

Knock Sensor B136 4 2.5 2.5 Purple

RPM B134 30 0-13 or more Green Waveform

Oxygen Sensor B136 18 0 0-0.9 Blue

Airflow In(from sensor) B136 5 3.4-3.6 1.2-1.8 White
Airflow Out(to Ecu) B136 Yellow

edit: this chart did not come out good in post, but if anyone needs the pinouts, i have the book, feel free to IM me on AIM screen name: scoobygc8