View Full Version : Taking out the backseat to access trunk


chiefontheditty
07-13-2005, 10:14 PM
Hey I was just wondering if I can take out the backseat of my 04 wrx to get into the trunk? And if I can how do I go about doing it. Thanks, Chief

GasPipe DreameR
07-13-2005, 10:29 PM
you can take out the back seat. i think scoobymods.com has all the hows 2

DLUX WRX
07-16-2005, 12:55 AM
i think there are two bolts down below the seat a few inches above the floor. remove thoes two and then pull out the lower seat section. thats all i can remember. i think you then have acess to the bolts that hold the back part to the body. remove thoes and push the seat back up and its unhooks from the rear deck.

SignalWRX
07-17-2005, 12:14 PM
all it is is 2 bolts holding in the bottom and then 2 holding in the top, plus some hooks that are easily undone.

spoolinwrx
07-18-2005, 12:14 AM
There should be a Sedan rear folding seat kit made. Can the wagon seats fit into the sedans?

Wingless Wonder
07-18-2005, 05:59 AM
Thread moved from EJ20 Engine forum.

--
0==WW==0
"…axles of evil…" - george w. bush

nachomc
07-22-2005, 01:50 PM
Removing the seats in the sedan is cake.

Below the rear seats (at the front) are two bolts. Take em out.
Now lift the bottom portion of the seat up, and pull it forward, removing it from the car.
Behind the seat cushion should be four bolts at the bottom of the upper seat half. remove those.
Now open up your armrest and pass through, then lift up on the upper seat half and remove.

voila