FS:(IA) 08+ STi Magnaflow Exhaust, And Garage Sale Too Many Parts!
05-13-2010, 02:04 PM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: May 2010
Location: Davenport, IA
Posts: 18
Car Info: 2008 STi Aspen White
FS:(IA) 08+ STi Magnaflow Exhaust, And Garage Sale Too Many Parts!
What is your name(first)? : Alex
What is your Email Address OR Contact PH #? : haugen930@yahoo.com
What is your State? : IA (Davenport area, also go to Chicago IL a ton)
Alright guys, I have well, lets just say way way too many parts sitting around in the garage I need to sell. So Lets start:
1st- 2008+ STi (will fit WRX hatch with minor bumper trimming) Magnaflow Exhaust. Been on the car about a year, in VERY good shape. I have ceramic painted all the pipes flat black for a stealth look, muffler and tips still shiny, however if you would like the muffler painted to match I will do that as well. I will also polish the tips the best I can before I ship.
MAGNAFLOW SOLD
Next I have a BRAND NEW P&L Clutch Line Fits all Years WRX and STi
SOLD
2.5L Turbo Manifold from a 07 WRX, perfect for porting!
SOLD
Stock 08 STi Struts, VERY LOW MILES! Under 12K includes everything but springs.
Price: $150 + Shipping or you can pick up
08+ STi / WRX Sway Bar Links Also very low miles, 5k ish on these
Price: Make Offer
Stock 08 STi Exhaust Parts: Front Cat (downpipe), Mid Cat, Mid-pipe (not pictured) and muffler. VERY VERY low miles on them. Would say less than 6k
Price: Make Offer
What is your Email Address OR Contact PH #? : haugen930@yahoo.com
What is your State? : IA (Davenport area, also go to Chicago IL a ton)
Alright guys, I have well, lets just say way way too many parts sitting around in the garage I need to sell. So Lets start:
1st- 2008+ STi (will fit WRX hatch with minor bumper trimming) Magnaflow Exhaust. Been on the car about a year, in VERY good shape. I have ceramic painted all the pipes flat black for a stealth look, muffler and tips still shiny, however if you would like the muffler painted to match I will do that as well. I will also polish the tips the best I can before I ship.
MAGNAFLOW SOLD
Next I have a BRAND NEW P&L Clutch Line Fits all Years WRX and STi
SOLD
2.5L Turbo Manifold from a 07 WRX, perfect for porting!
SOLD
Stock 08 STi Struts, VERY LOW MILES! Under 12K includes everything but springs.
Price: $150 + Shipping or you can pick up
08+ STi / WRX Sway Bar Links Also very low miles, 5k ish on these
Price: Make Offer
Stock 08 STi Exhaust Parts: Front Cat (downpipe), Mid Cat, Mid-pipe (not pictured) and muffler. VERY VERY low miles on them. Would say less than 6k
Price: Make Offer
Last edited by redefinedtr; 05-19-2010 at 12:46 PM.
05-13-2010, 02:05 PM
#2
Registered User
Thread Starter
iTrader: (1)
Join Date: May 2010
Location: Davenport, IA
Posts: 18
Car Info: 2008 STi Aspen White
More Stuff:
Stock 08 STi Torque Strut, I took this off the day I got the car because I had an Ingals from my old WRX.
SOLD
08 STi Power Steering Line, replaced at 20K miles or so with the P&L Line. Nothing is wrong with it at all.
Price: Make Offer
Eibach camber bolts, I think they are 3+/- but you can check the part number on the box. They fit all Subaru Impreza / WRX / STi Front or Rear from 02-07 and 08+ Fronts only. Used for 2 weeks on the rear of my buddies 02 until we could roll the fenders and make his new rubber fit.
Price: Make Offer
2008 STi Front Stock Rotors 12k Miles, no deep gouges in it or anything, most likely don't need to even be refinished. Used my scuffer on them (the kind most shops use on new rotors to get them ready to install) to knock off any surface rust from sitting and repainted the hubs with high temp paint. They are almost like new! Price: SOLD
08+ Impreza / WRX / STi hatch strut tower bar brackets. You will just need to add your own bar you could easily make from some aluminum stock. SAVE BIG $$ doing it yourself. I don't actually know why I have an extra set of these. But they are Megan Racing:
Price: Make Offer
Stock 08 WRX Sedan Springs. We got the SPT pinks 2 weeks after we got the car, so these where hardly used.
Price: Make Offer
07 WRX AC Condenser LOW miles, no leaks, just a few bugs and minor bent fins.
Price: Make Offer
Set of 4 car dollies. Used for one winter to store my 07 WRX when I had it. They where $60 a pair when I got them. I would like $75 for the entire set plus shipping but this is neg.
Main oil galley plug for 2.5L Turbo motors, (may also fit others, check part number) This is the one that allows you to add an after market Oil Pressure Sensor to the car in the rear (Filled plug) They are around $10 and I never removed it from the package.
Price: Make Offer
Stock 08 STi Torque Strut, I took this off the day I got the car because I had an Ingals from my old WRX.
SOLD
08 STi Power Steering Line, replaced at 20K miles or so with the P&L Line. Nothing is wrong with it at all.
Price: Make Offer
Eibach camber bolts, I think they are 3+/- but you can check the part number on the box. They fit all Subaru Impreza / WRX / STi Front or Rear from 02-07 and 08+ Fronts only. Used for 2 weeks on the rear of my buddies 02 until we could roll the fenders and make his new rubber fit.
Price: Make Offer
2008 STi Front Stock Rotors 12k Miles, no deep gouges in it or anything, most likely don't need to even be refinished. Used my scuffer on them (the kind most shops use on new rotors to get them ready to install) to knock off any surface rust from sitting and repainted the hubs with high temp paint. They are almost like new! Price: SOLD
08+ Impreza / WRX / STi hatch strut tower bar brackets. You will just need to add your own bar you could easily make from some aluminum stock. SAVE BIG $$ doing it yourself. I don't actually know why I have an extra set of these. But they are Megan Racing:
Price: Make Offer
Stock 08 WRX Sedan Springs. We got the SPT pinks 2 weeks after we got the car, so these where hardly used.
Price: Make Offer
07 WRX AC Condenser LOW miles, no leaks, just a few bugs and minor bent fins.
Price: Make Offer
Set of 4 car dollies. Used for one winter to store my 07 WRX when I had it. They where $60 a pair when I got them. I would like $75 for the entire set plus shipping but this is neg.
Main oil galley plug for 2.5L Turbo motors, (may also fit others, check part number) This is the one that allows you to add an after market Oil Pressure Sensor to the car in the rear (Filled plug) They are around $10 and I never removed it from the package.
Price: Make Offer
Last edited by redefinedtr; 05-14-2010 at 07:09 PM.
05-13-2010, 02:05 PM
#3
Registered User
Thread Starter
iTrader: (1)
Join Date: May 2010
Location: Davenport, IA
Posts: 18
Car Info: 2008 STi Aspen White
ALL PARTS BUYER MUST PAY ANY SHIPPING CHARGES
PAYMENT IS ACCEPTED VIA CASH OR PAYPAL.
DEPENDING ON HOW YOU ARE GETTING THEM.
[size=10pt][size=10pt]PLEASE E-MAIL ME AT Haugen930@yahoo.com[/size][/size] if interested in anything. I don't get on here as much as I would like to and I can give you the fastest response that way.
Also may be willing to trade exhaust for something louder. Like Invidia N1 Race or something like that. So if you have one and want to swap let me know.
PAYMENT IS ACCEPTED VIA CASH OR PAYPAL.
DEPENDING ON HOW YOU ARE GETTING THEM.
[size=10pt][size=10pt]PLEASE E-MAIL ME AT Haugen930@yahoo.com[/size][/size] if interested in anything. I don't get on here as much as I would like to and I can give you the fastest response that way.
Also may be willing to trade exhaust for something louder. Like Invidia N1 Race or something like that. So if you have one and want to swap let me know.
05-13-2010, 05:34 PM
#4
Registered User
Thread Starter
iTrader: (1)
Join Date: May 2010
Location: Davenport, IA
Posts: 18
Car Info: 2008 STi Aspen White
Only other thing I found was a template some guys on NASIOC made to install the Roof Vain Spoiler from the 07ish STi's on previous years. I used it as well as several others and it worked well. I don't want anything for the template. Just like $3 to ship it.
Rotors may be sold, just waiting on payment.
Rotors may be sold, just waiting on payment.
05-13-2010, 05:51 PM
#5
Registered User
Thread Starter
iTrader: (1)
Join Date: May 2010
Location: Davenport, IA
Posts: 18
Car Info: 2008 STi Aspen White
Found this too:
Beltronics Vector FX2 Performance Timer Accelerometer -G timer (This is the one tire companies use to test there tires!)
They sell new for $250 and I have all the parts still, bracket to mount to windshield and cord with remote trigger for power socket.
SOLD
Beltronics Vector FX2 Performance Timer Accelerometer -G timer (This is the one tire companies use to test there tires!)
They sell new for $250 and I have all the parts still, bracket to mount to windshield and cord with remote trigger for power socket.
SOLD
Last edited by redefinedtr; 05-14-2010 at 07:09 PM.
05-19-2010, 06:50 AM
#13
Registered User
Thread Starter
iTrader: (1)
Join Date: May 2010
Location: Davenport, IA
Posts: 18
Car Info: 2008 STi Aspen White
AM Bump, the 06-07 WRX / Forester Turbo manifold is NOW PORTED!!!
Asking $100 shipped for the outer 2 cast pieces
+20 if you want crossover pipe (slight port)
Asking $100 shipped for the outer 2 cast pieces
+20 if you want crossover pipe (slight port)
05-20-2010, 05:52 AM
#15
Registered User
Thread Starter
iTrader: (1)
Join Date: May 2010
Location: Davenport, IA
Posts: 18
Car Info: 2008 STi Aspen White
Morning bump. Will be in Chicago area Tomorrow Friday May 21st. So if anyone needs anything and would like to pick it up form me there let me know today.
haugen930@yahoo.com
haugen930@yahoo.com