Kartboy rear endlinks height question
 

Hi all,

This question is regarding the upgrade of enlinks on my '06 WRX. During research of all the products out there, I came upon a statement in a product description for Kartboy solid rear endlinks on one of the vendor web-sites that raised some questions...

It said that[I]..."the overall height of the links is reduced from the stock item in order to allow additional clearance to the fuel filler neck." [/I]([url]http://www.renickmotorsports.com/oscommerce/catalog/product_info.php?cPath=676_726_733&products_id=659[/url])

I already have TEIN coilovers and the car is lowered about an inch, so my concerns were...Is the reduced endlink height will lower my car even further? Am I going to need to readjust the height of my car and/or worry about any rubbing or alignment issues?

I have not yet seen such statements for other endlink products, so I do not know if it is something unique to Kartboy or this is a common among all of the products. I am assuming that is why Kartboy refers to them on their web-site as drop-links.

Just in case, below is a complete listing of all my suspension modifications...

- TEIN Super Street Damper Coil Overs
- STi Heavy Duty "Group N" Front/Rear Strut Top Mounts
- Greddy Front Strut Tower Brace
- STi Rear Strut Tower Brace
- Cusco 22mm Front Sway Bar, Unadjustable
- Cusco 22mm Rear Sway Bay, 3-Way Adjustable
- 17x8 Raze Wheels R74

PS. I did do a forum search before posting, but was unable to find any threads regarding this specific issue. My apologies if I did miss any posts that exist regarding this topic. Thank you.

no its fine it just pullst he bar up a bit

and you did fine on your post :)

Awesome! Thanks. Just ordered both front and rear links to finally take full advantage of those sways =)