NEW! Rear Shifter Bushings for the Subies!
04-16-2005, 04:06 PM
#1
NEW! Rear Shifter Bushings for the Subies!
Announcing the new REAR shifter bushing for your Manual tranmssion car.
MSRP is set at 35.00. Install should take about a half hour with normal hand tools.
Peaty will have the great install pages like normal
( thanks Peaty)
New hardware is included with the bushing.
you can order directly from our website or click this LINK
Tom@kartboy
Quickie picture of the rear bushing and hardware.
MSRP is set at 35.00. Install should take about a half hour with normal hand tools.
Peaty will have the great install pages like normal
( thanks Peaty)New hardware is included with the bushing.
you can order directly from our website or click this LINK
Tom@kartboy
Quickie picture of the rear bushing and hardware.
04-19-2005, 09:02 AM
#2
Registered User
Join Date: Mar 2004
Posts: 113
Car Info: 2002 Impreza WRX
Ok, you've tweaked my interest. 
Does this replace number 13 (on the lower right hand side) in the pic below?
http://img249.echo.cx/img249/6082/shiftlinkage4ed.gif
Edit: Linkified the Pic so that its easier to view this thread. The picture is a breakaway of the transmission linkage.
Does this replace number 13 (on the lower right hand side) in the pic below?
http://img249.echo.cx/img249/6082/shiftlinkage4ed.gif
Edit: Linkified the Pic so that its easier to view this thread. The picture is a breakaway of the transmission linkage.
Last edited by symby; 04-22-2005 at 04:50 AM.
04-20-2005, 12:05 PM
#6
VIP Member
iTrader: (5)
Join Date: Jul 2004
Location: Walnut, CA
Posts: 10,118
Car Info: 2005 Pooparu
what would this bushing do? would it stiffen and make the throw of the shifter even more precise?
i'm already running KB SS and bushing..
+1 for kartboy they sell good stuff.
i'm already running KB SS and bushing..
+1 for kartboy they sell good stuff.
04-21-2005, 09:03 PM
#11
Originally Posted by spelk3
Are the installation instructions posted anywhere?
were working( when i say that i mean Peaty
) is working on them right now.its pretty easy install. basic hand tools are what is needed
Tom
05-06-2005, 11:28 PM
#15
Registered User
iTrader: (4)
Join Date: Aug 2004
Location: Bakersfield
Posts: 658
Car Info: 06 STI WRB/Gold
The install is not hard at all only a 20 to 30 min job. Stiffer shifter feel. No more play with the old rubber bushing. Works well with the other kartboy shifter bushings and short shifter.